What Score Do You Need to Pass the AMA Exam?

The AMA passing score is 70%: 70 correct answers out of 100 multiple-choice questions, in 2.0 hours (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17). It is a fixed percentage for each mechanic test, not a curve or a scaled score, and scores on the other writtens cannot offset a result below 70%.

Try 3 real AMA questions

Real questions from the AMA bank, with the cited explanation for every answer. Tap an answer to check it.

1. In a semimonocoque fuselage, what is the primary function of the longerons?

2. A sheet metal repair on an aluminum airframe calls for universal-head rivets that can be driven in the as-received condition without prior heat treatment. Which rivet alloy code should the mechanic select?

3. What is the maximum continuous withdrawal rate for an acetylene cylinder?

Is the AMA passing score really just 70%?

Yes, and it is stated that plainly in the regulation. Section 65.17 of Title 14 says the minimum passing grade for each test prescribed under Part 65 is 70 percent (14 CFR 65.17). The FAA's testing matrix applies that same 70 to the AMA by name, alongside its 100 questions and 2.0-hour limit (FAA Airman Knowledge Testing Matrix).

That plainness is worth pausing on, because candidates coming from other certification systems often expect something more complicated. There is no published scaled-score conversion for the AMA in the regulation or the testing matrix: the bar is a percentage of the questions on your test. There is also no curve described in those sources. Your result does not depend on how other candidates scored that day; it depends on whether your own count of correct answers reaches 70.

The word "each" in the regulation matters too. The 70% minimum applies to each test separately (14 CFR 65.17), and an applicant must pass each section of the written test before applying for the oral and practical tests (14 CFR 65.75). A strong Powerplant score does not average away a 68% on the Airframe test, and the Airframe test cannot borrow points from General.

One clarification that causes real confusion: AMA is a single knowledge test — the Airframe written — not the A&P certificate itself. The certificate requires the applicable knowledge tests plus the oral and practical exams for the rating sought (FAA-G-ACS-1 Companion Guide). Passing the AMA is one step toward the Airframe rating, not the whole credential.

What does 70% mean in questions you can miss?

On a 100-question test, the arithmetic is simple:

Your result Correct answers Questions missed Outcome
100% 100 0 Pass
90% 90 10 Pass
80% 80 20 Pass
70% 70 30 Pass — exactly at the line
69% 69 31 Fail — one question below the line

Source: 100 questions and 70% passing score for the AMA (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17)

Read that table from the bottom up. The distance between passing and failing is one question. That is not a reason to be anxious about the number itself — 70 is a clear, public bar — but it is a reason not to plan your preparation around hitting 70 exactly. A form that leans harder on structures, a figure you misread in the testing supplement, or a rough morning can each cost more than one question.

The pacing math points the same way. The AMA gives you 2.0 hours for 100 questions (FAA Airman Knowledge Testing Matrix), which is 120 minutes divided by 100, or 72 seconds per question. That is enough time for a question you know. It leaves little room to rebuild an unfamiliar system from first principles in the testing room, which is why the score you can produce under timed conditions matters more than the score you can produce untimed at a desk.

How does AMA scoring compare with the other mechanic writtens?

All three mechanic knowledge tests use the same 70% passing grade, but they do not have the same length or the same pacing:

Test Questions Time limit Passing score Correct to pass Time per question
AMG (General) 60 2.0 hours 70% 42 2 minutes
AMA (Airframe) 100 2.0 hours 70% 70 72 seconds
AMP (Powerplant) 100 2.0 hours 70% 70 72 seconds

Source: FAA Airman Knowledge Testing Matrix; passing grade in 14 CFR 65.17

Two things follow from that comparison. First, the AMA is tied for the longest of the three writtens, at 100 questions (FAA Airman Knowledge Testing Matrix). Second, its pacing is tied for the tightest, at 72 seconds per question. Candidates who passed the General test comfortably sometimes assume the Airframe test will feel the same; the percentage is the same, but the margin for slow questions is smaller.

The AMA's 100 questions are drawn from 15 subject areas in Section II of the Aviation Mechanic Airman Certification Standards: Metallic Structures, Non-Metallic Structures, Flight Controls, Airframe Inspection, Landing Gear Systems, Hydraulic and Pneumatic Systems, Environmental Systems, Aircraft Instrument Systems, Communication and Navigation Systems, Aircraft Fuel Systems, Aircraft Electrical Systems, Ice and Rain Control Systems, Airframe Fire Protection Systems, Rotorcraft Fundamentals, and Water and Waste Systems (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II). The written tests are objective multiple-choice with a single correct response, and each question is independent of the others (FAA-G-ACS-1 Companion Guide). There is no single subject area you can skip and still have a comfortable path to 70: the test samples across the whole Airframe standard, from sheet metal to systems.

What does your score report actually show?

When you finish, you receive an Airman Knowledge Test Report, the AKTR. It shows your score, and it prints ACS codes for the knowledge areas tied to the questions you missed (FAA Airman Knowledge Testing Matrix; FAA-G-ACS-1 Companion Guide).

That second part is the part many candidates overlook. The codes are not just feedback for your own study. The deficient knowledge areas indicated on the AKTR are retested during the oral portion of the practical test (FAA-G-ACS-1 Companion Guide). In plain terms, the areas you missed on the written follow you to the examiner's table, where you will be asked about them again in a different format.

This changes what a good score means. A 71% pass and an 88% pass both clear the same written bar, and both count the same way toward the certificate. But the 71% report will, by definition, carry more missed areas, and each of those areas becomes oral preparation you still have to do. A higher written score does not remove the oral — the oral and practical are separate required tests (FAA-G-ACS-1 Companion Guide) — it narrows the list of weak areas the examiner is directed to revisit.

Keep the report either way. Whether you pass or fail, the AKTR is the most specific record you will get of where your Airframe knowledge held and where it did not, because it names the standard behind each missed question rather than leaving you to guess from memory.

What score should you aim for in practice?

Aim well above the line. As a preparation target — our recommendation, not an FAA rule — treat 85% or better on timed, full-length practice as the point where you are ready to schedule the real test. That target gives you a 15-question cushion above the 70 you need (FAA Airman Knowledge Testing Matrix), which is room for a harder-than-expected form, unfamiliar wording, and the ordinary cost of test-day nerves.

Look at the pattern behind the practice score, not just the number. Because the AMA samples 15 subject areas (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II), an 85% built evenly across those areas is a different signal from an 85% built by scoring near-perfectly on structures while missing most electrical or hydraulic questions. The second pattern can still produce a passing total, but it leaves you exposed if your form draws more heavily from your weak area, and it predicts a longer AKTR code list if you do pass.

Pacing belongs in the same check. A practice score only counts as evidence if it was produced inside the real limit: 100 questions in 2.0 hours (FAA Airman Knowledge Testing Matrix). If you needed three hours to reach 85%, you have not yet shown you can reach 70% in two. Train the 72-second pace alongside the content, and flag questions you cannot answer in that window for a second pass rather than letting one hard item consume the time for three easier ones.

How long does a passing AMA score last?

A passing score is not open-ended. To be eligible for a mechanic certificate and its ratings, you must have passed all of the prescribed tests within a period of 24 months (14 CFR 65.71).

That window is easy to misread, so be precise about it: the rule is about passing all of the prescribed tests within that 24-month period, not about a single test expiring in isolation on a printed date. In practice, it means your General, Airframe, and Powerplant writtens and the oral and practical need to fit inside one 24-month span. If you pass the AMA early and then let a long gap pass before finishing the rest, you can run out of window and face retesting. Plan the sequence backward from when you expect to sit for the oral and practical, rather than treating each written as a standalone event with no clock attached.

What happens if you score below 70%?

You do not pass, and you cannot move on to the oral and practical for that rating on the strength of that attempt, because an applicant must pass each section of the written test before applying for the oral and practical tests (14 CFR 65.75).

For retesting, the regulation gives two paths. You may apply for retesting after 30 days from the date you failed the test, or before those 30 days have expired if you present a signed statement from an airman holding the certificate and rating you are seeking, certifying that you received additional instruction in each subject you failed and that the airman considers you ready for retesting (14 CFR 65.19).

Use the failed AKTR as the study plan for that interval. Its ACS codes name the deficient areas from your actual attempt (FAA-G-ACS-1 Companion Guide), which is a narrower and more honest list than starting the whole Airframe syllabus over. Rebuild those areas first, confirm them under timed practice, and only then widen back out to full-length review. A fail with codes clustered in two areas is a different problem — and a faster one to fix — than a fail spread thinly across all 15 areas (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II).

What this article cannot tell you

This article can tell you the bar with certainty: 70 correct out of 100, in 2.0 hours, with each test judged on its own (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17). What it cannot tell you is where you stand against that bar today, which of the 15 Airframe areas would pull your score down, or whether you can hold your pace for a full 100 questions (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II).

That is what a diagnostic is for. The free 25-question AMA diagnostic on Upward Prep shows you your readiness by subject area, so you can see the pattern behind the score before the real test prints it on an AKTR. Start there, study the areas it flags, and re-check yourself under timed conditions before you schedule.

Take the free 25-question AMA practice test

Frequently asked questions

ama passing score

The AMA passing score is 70%, which is 70 correct answers out of 100 multiple-choice questions in 2.0 hours (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17). It applies to the AMA on its own; scores from the General or Powerplant tests cannot be averaged with it.

how many questions

There are 100 questions on the AMA (FAA Airman Knowledge Testing Matrix). At the 70% pass line that means 70 correct answers, 30 questions you can miss, and 72 seconds per question inside the 2.0-hour limit.

is the airframe written hard

The bar itself is fixed and public: 70 of 100 correct, with no curve described in the regulation or the testing matrix (14 CFR 65.17; FAA Airman Knowledge Testing Matrix). Where candidates usually feel the difficulty is breadth across 15 subject areas and the tight 72-second pace, not the percentage — which is why the safer practice target is 85% or better, so a hard form or a bad morning still leaves you above 70.

what is on the airframe exam

The Airframe exam, the AMA, is 100 multiple-choice questions drawn from 15 ACS subject areas: Metallic Structures, Non-Metallic Structures, Flight Controls, Airframe Inspection, Landing Gear Systems, Hydraulic and Pneumatic Systems, Environmental Systems, Aircraft Instrument Systems, Communication and Navigation Systems, Aircraft Fuel Systems, Aircraft Electrical Systems, Ice and Rain Control Systems, Airframe Fire Protection Systems, Rotorcraft Fundamentals, and Water and Waste Systems (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II).

what happens if you fail the airframe written

You may apply for retesting after 30 days, or sooner if you present a signed statement from an airman holding the certificate and rating you are seeking, certifying that you received additional instruction in each subject you failed and are considered ready for retesting (14 CFR 65.19). Your AKTR from the failed attempt lists ACS codes for the areas you missed, and those codes are the restudy list for the next attempt (FAA Airman Knowledge Testing Matrix).