Is the AMA Exam Hard? (Honest 2026 Breakdown)
Is the AMA exam hard? Yes — and it's the hardest written for a large share of candidates. You get 100 multiple-choice questions across 15 subject areas in 2 hours (about 72 seconds each), and need 70% to pass. The difficulty isn't trick questions; it's the breadth: structures, systems, welding, fabric, rotorcraft fundamentals, and more, all in one sitting.
Try 3 real AMA questions
Real questions from the AMA bank, with the cited explanation for every answer. Tap an answer to check it.
1. In a semimonocoque fuselage, what is the primary function of the longerons?
Semimonocoque construction reinforces the skin with longitudinal members called longerons, which extend across several frame members and help the skin support primary bending loads.
Source: Aviation Maintenance Technician Handbook—Airframe (FAA-H-8083-31B), Chapter 1, Aircraft Structures — Semimonocoque Type (p. 1-8)
2. A sheet metal repair on an aluminum airframe calls for universal-head rivets that can be driven in the as-received condition without prior heat treatment. Which rivet alloy code should the mechanic select?
The AD rivet (2117-T4) is the most frequently used repair rivet because it can be installed in the received condition. DD rivets (2024-T4) are too hard to drive as-received and must be annealed and refrigerated before installation.
Source: Aviation Maintenance Technician Handbook—Airframe (FAA-H-8083-31B), Chapter 4, Aircraft Metal Structural Repair — Rivets (p. 4-33)
3. What is the maximum continuous withdrawal rate for an acetylene cylinder?
Acetylene is limited to a maximum continuous withdrawal rate of one-seventh of the cylinder's rated capacity when full (e.g., a 330 cu ft cylinder allows 47 cu ft per hour). Faster withdrawal pulls acetone from the cylinder.
Source: Aviation Maintenance Technician Handbook—Airframe (FAA-H-8083-31B), Chapter 5, Aircraft Welding — Acetylene (p. 5-11)
What the AMA exam actually looks like
First, the confusion that brings many searchers to this page: the AMA is one written test, not a certificate. AMA is the test code for the Aviation Mechanic — Airframe knowledge test. "A&P" is the full Airframe and Powerplant mechanic certificate, which you earn by passing all three knowledge tests (General, Airframe, Powerplant) and then the oral and practical exams for each rating (FAA-G-ACS-1 Companion Guide, Ch. 1). The AMA gets you one-third of the way through the writtens.
Here's how the three knowledge tests compare — all published openly in the FAA's companion guide:
| Test | Questions | Time | Pass score |
|---|---|---|---|
| AMG (General) | 60 | 2.0 hours | 70% (42 correct) |
| AMA (Airframe) | 100 | 2.0 hours | 70% (70 correct) |
| AMP (Powerplant) | 100 | 2.0 hours | 70% (70 correct) |
Source: FAA-G-ACS-1 Companion Guide, Ch. 3, Written Test Description table
Two things stand out. First, the pacing is tight: 100 questions in 120 minutes is about 72 seconds per question — the same compressed pacing as the Powerplant test, and much less forgiving than the 2 minutes per question the General test gives you. Second, the pass bar is a fixed 70% standard set by regulation (14 CFR 65.17), not a curve. You are not competing against other test-takers; you are competing against the standard.
To sit for the test, you need an authorization document — either an authenticated document from an FAA-approved Aviation Maintenance Technician School, or an FAA Form 8610-2 endorsed by a Flight Standards District Office (FAA-G-ACS-1 Companion Guide, Ch. 4).
What's actually on the AMA exam
The AMA samples 15 subject areas from Section II of the Aviation Mechanic Airman Certification Standards — the most of any of the three writtens. The FAA publishes how much of the test each area can make up:
| Subject area | Share of the test |
|---|---|
| Metallic Structures | 5–15% (heaviest band) |
| Non-Metallic Structures | 5–10% |
| Flight Controls | 5–10% |
| Airframe Inspection | 5–15% (heaviest band) |
| Landing Gear Systems | 5–10% |
| Hydraulic and Pneumatic Systems | 5–10% |
| Environmental Systems | 5–10% |
| Aircraft Instrument Systems | 5–10% |
| Communication, Light Signals, and Runway Lighting Systems | 5–10% |
| Aircraft Fuel Systems | 5–10% |
| Aircraft Electrical Systems | 5–10% |
| Ice and Rain Control Systems | 5–10% |
| Airframe Fire Protection Systems | 5–10% |
| Rotorcraft Fundamentals | 5–10% |
| Water and Waste Systems | 5–10% |
Source: FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table
The weight bands tell you where study hours earn the most. Metallic Structures and Airframe Inspection top out at 15% each — up to 15 questions per area on a 100-question test. Between the two heaviest bands, nearly a third of the exam can come from structures and inspection alone. Those are the areas to study first.
Why the AMA is the hardest written for many candidates
Talk to candidates who've taken all three writtens and a pattern emerges: the Airframe test is the one people dread. Here's why, honestly:
Breadth, not depth. Fifteen subject areas is the widest spread of the three writtens. The exam jumps from rivet spacing and bend allowances to cable tensioning, to hydraulic actuators, to water and waste system servicing. You don't need doctoral depth in any one area — but you do need working familiarity with all fifteen.
Two subjects most people never trained for. Rotorcraft Fundamentals and Water and Waste Systems are dedicated subject areas on the Airframe test, each worth 5–10%. If your experience is fixed-wing general aviation, the helicopter-specific questions feel like they came out of nowhere. Most candidates report these as the surprise questions — and they're fully in the open in the ACS, so there's no excuse for them to surprise you.
Structures is memorization-heavy. Metallic Structures — the single heaviest subject — is pure specification memory: aluminum alloy designations, rivet types and spacing rules, bend allowance formulas, corrosion treatment. There's no shortcut around it; you either know that an MS20470AD4 rivet's grip length or you don't.
The pacing punishes perfectionists. At 72 seconds per question, you can't deliberate. Candidates who do well treat the AMA like a sprint: answer the easy recall questions fast, mark the calculation-heavy ones (weight-and-balance carryovers, cable tensioning, electrical) and come back. The questions are independent — a correct answer on one never depends on another (FAA-G-ACS-1, Ch. 3) — so there's no benefit to solving them in order.
The good news: the blueprint is fully public. The companion guide publishes the subject list and weight bands openly, and the written test only samples the ACS. Nobody can ask you something that isn't in the standards. That means the AMA is beatable with focused study — but it does not forgive skipping subjects.
AMA vs A&P: clearing up the confusion
"AMA" and "A&P" sound similar and search engines mix them up constantly, so let's settle it plainly:
- AMA = one written test. The Aviation Mechanic — Airframe knowledge test. 100 questions, 2 hours, 70% to pass. Passing it alone earns you nothing except the right to move on to the oral and practical for the Airframe rating.
- A&P = the full certificate. The Airframe and Powerplant mechanic certificate. Earning it requires passing all three knowledge tests (General, Airframe, Powerplant), then passing the oral and practical exams for each rating with a Designated Mechanic Examiner (FAA-G-ACS-1 Companion Guide, Ch. 1).
You can earn just the Airframe rating — the FAA issues the ratings separately, and 18 months of practical airframe experience (or graduation from an FAA-approved AMTS) qualifies you for it under 14 CFR 65.71. But most employers and most training programs treat the full A&P as the standard credential, and most candidates take all three writtens in sequence.
How to beat the AMA's hard parts
If the breakdown above makes the test sound intimidating, that's the point — respect it, then study it:
- Start with the two heaviest bands. Metallic Structures and Airframe Inspection can each be up to 15% of the test. Master rivet identification and spacing, alloy designations, bend allowance, corrosion control, and the inspection types and scopes first. Everything else builds on those.
- Study Rotorcraft Fundamentals and Water and Waste Systems deliberately. These are the "free points" most candidates leave on the table because their experience never covered them. Even a few hours here can be the difference between 68% and 70%.
- Practice at 72-second pacing. Timed practice tests are the only way to find out whether you can move fast enough. If you're consistently running out of time, you're over-thinking early questions — mark and move on.
- Use the ACS as a checklist. For each of the 15 subject areas, the ACS lists the knowledge items the test samples. Work through it line by line and flag what you can't explain; those are your study targets (FAA-S-ACS-1).
- Know the retest rule so a failure isn't fatal. If you fail, you wait 30 days — or retest sooner with a signed statement of additional instruction from an instructor (14 CFR 65.19) (govinfo). Your failure report (the AKTR) lists the ACS codes you missed, which is a gift: it tells you exactly what to study.
Frequently asked questions
Is the airframe written hard?
Yes. Candidates consistently rate it the most memorization-heavy of the three FAA mechanic writtens: 100 questions across 15 subject areas in 2 hours, with structures, systems, welding, fabric, rotorcraft, and water/waste coverage. The 70% pass bar (14 CFR 65.17) is reachable with focused study because the entire blueprint is published in the FAA's companion guide.
What is the hardest FAA written?
For most candidates, it's a contest between the Airframe (AMA) and Powerplant (AMP) tests — both are 100 questions in 2 hours. The AMA gets the nod for hardest most often because of its 15 subject areas, the widest spread of the three writtens, including Rotorcraft Fundamentals and Water and Waste Systems that surprise fixed-wing candidates (FAA-G-ACS-1 Companion Guide).
Airframe vs powerplant: which is harder?
It depends on your background. The Airframe test (AMA) covers 15 subject areas with heavy memorization in structures and inspection; the Powerplant test (AMP) covers 13 areas weighted toward turbine theory and engine systems. Both are 100 questions, 2 hours, 70% to pass. Structures people tend to find the AMA easier; engine people tend to find the AMP easier. The pacing is identical — 72 seconds per question (FAA-G-ACS-1 Companion Guide, Ch. 3).
AMA vs A&P: what's the difference?
AMA is one knowledge test (the Airframe written). A&P is the full Airframe and Powerplant mechanic certificate, earned by passing all three knowledge tests plus the oral and practical exams for each rating. You need 18 months of practical experience for one rating or 30 months for both, or graduation from an FAA-approved Aviation Maintenance Technician School (14 CFR 65.71; FAA-G-ACS-1, Ch. 1).
What is on the airframe exam?
The AMA tests 15 subject areas from the Aviation Mechanic ACS: Metallic Structures, Non-Metallic Structures, Flight Controls, Airframe Inspection, Landing Gear Systems, Hydraulic and Pneumatic Systems, Environmental Systems, Aircraft Instrument Systems, Communication/Lighting Systems, Aircraft Fuel Systems, Aircraft Electrical Systems, Ice and Rain Control Systems, Airframe Fire Protection Systems, Rotorcraft Fundamentals, and Water and Waste Systems (FAA-G-ACS-1 Companion Guide).
What happens if you fail the airframe written?
You may retest 30 days after the failure — or sooner with a signed statement of additional instruction from an instructor (14 CFR 65.19) (govinfo). Each attempt costs roughly $175 (Kent State FAA Testing Center). Your failure report (AKTR) lists the ACS codes you missed — use it as a study plan. Failing a written never affects the certificate you already hold, and you can retest as many times as needed.
Test what the article can't tell you
Reading about the AMA tells you what's on it. It doesn't tell you whether you can pass it today. That's what Upward Prep's free 25-question AMA diagnostic is for: timed, ACS-mapped questions across all 15 subject areas, with cited explanations for every answer. Take it, see where your 70% really stands, and study what's actually broken — not what you hope is broken.
