What's Actually on the AMG Exam: Subject-by-Subject Breakdown

What is on the AMG exam is 60 multiple-choice questions drawn from 12 subject areas in the FAA Aviation Mechanic Airman Certification Standards: mathematics, physics, basic electricity, aircraft drawings, weight and balance, fluid lines and fittings, materials and hardware, cleaning and corrosion control, inspection concepts, regulations, human factors, and ground operations and servicing (FAA-G-ACS-1 Companion Guide).

Try 3 real AMG questions

Real questions from the AMG bank, with the cited explanation for every answer. Tap an answer to check it.

1. A 28-volt DC circuit contains a single 7-ohm resistor. How much current flows in the circuit?

2. An aircraft cabin light draws 5 amperes from the 28-volt DC bus. How much electrical power does the light consume?

3. Three resistors of 10 ohms, 20 ohms, and 30 ohms are connected in series across a voltage source. What is the total resistance of the circuit?

Where does this breakdown come from?

It comes from the FAA's own publications, not from a prep company's guess. The subject areas are the 12 knowledge areas in Section I of the Aviation Mechanic ACS, FAA-S-ACS-1, and the Companion Guide to that standard, FAA-G-ACS-1, publishes both the written test description and the percentage of test questions each area carries (FAA-G-ACS-1 Companion Guide).

The AMG is the General test, one of the three FAA written tests on the way to an Airframe and Powerplant certificate. Its full format, next to the other two writtens, is:

Test Questions Time Pass score
AMG (General) 60 2.0 hours 70% (42 correct)
AMA (Airframe) 100 2.0 hours 70% (70 correct)
AMP (Powerplant) 100 2.0 hours 70% (70 correct)

Source: FAA-G-ACS-1 Companion Guide, Ch. 3, Written Test Description table

One more format fact shapes how you should read everything below: the written test is worked with the FAA-CT-8080-4G testing supplement, a booklet of figures and diagrams you reference during the exam (FAA Airman Knowledge Testing Matrix). Some questions in areas like Aircraft Drawings and Weight and Balance point at those figures, so the supplement itself is part of what is on the test.

What are the 12 subject areas at a glance?

Here is the whole test on one table: each ACS knowledge area, the share of the test the FAA assigns it, what that share means in questions on a 60-question test, and the FAA-H-8083-30B handbook chapter that covers it.

Subject area Share of the test Questions (of 60) Handbook chapter (FAA-H-8083-30B)
Fundamentals of Electricity and Electronics 5–15% 3–9 Ch. 12: Fundamentals of Electricity & Electronics
Ground Operations and Servicing 5–15% 3–9 Ch. 1: Safety, Ground Operations, & Servicing
Mathematics 5–10% 3–6 Ch. 3: Mathematics in Aviation Maintenance
Physics for Aviation 5–10% 3–6 Ch. 5: Physics for Aviation
Aircraft Drawings 5–10% 3–6 Ch. 4: Aircraft Drawings
Weight and Balance 5–10% 3–6 Ch. 6: Aircraft Weight & Balance
Fluid Lines and Fittings 5–10% 3–6 Ch. 9: Fluid Lines & Fittings
Aircraft Materials, Hardware, and Processes 5–10% 3–6 Ch. 7: Aircraft Materials, Hardware, & Processes
Cleaning and Corrosion Control 5–10% 3–6 Ch. 8: Cleaning & Corrosion Control
Inspection Concepts and Techniques 5–10% 3–6 Ch. 10: Inspection Concepts & Techniques
Regulations, Maintenance Forms, Records, and Publications 5–10% 3–6 Ch. 2: Regulations, Maintenance Forms, Records, & Publications
Human Factors 5–10% 3–6 Ch. 14: Human Factors

Sources: weight bands per the FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table for the AMG 60-question test; question counts are the bands applied to 60 questions; handbook chapters per the FAA-H-8083-30B table of contents, via Open Textbook Library.

Two things are worth noticing. First, the bands are ranges, not fixed counts: the FAA builds each test form inside these percentages, so your form's exact split will differ slightly from another candidate's. Second, the handbook mapping is almost perfectly one-to-one. Twelve tested areas, twelve matching chapters. That is what makes a subject-by-subject study plan possible at all: when you miss questions in an area, there is a specific chapter to go back to.

The handbook also carries two chapters with no ACS area of their own, Chapter 11 (Hand Tools & Measuring Devices) and Chapter 13 (Mechanic Privileges & Limitations) (FAA-H-8083-30B, table of contents, via Open Textbook Library). Treat them as support material for Inspection Concepts and Techniques and for Regulations rather than as separate subjects to schedule.

The calculation cluster: mathematics, physics, electricity, and weight and balance

Four of the 12 areas ask you to compute, not just recall, and together they are where most close scores are decided.

Mathematics (5–10%, Ch. 3: Mathematics in Aviation Maintenance) is the foundation layer: the arithmetic and problem setups that the other calculation areas assume you already have (FAA-H-8083-30B, table of contents, via Open Textbook Library). It is rarely the hardest material on the test, but a gap here shows up again inside electricity and weight-and-balance questions.

Physics for Aviation (5–10%, Ch. 5: Physics for Aviation) covers the basic physical principles behind aircraft work, in the handbook chapter of the same name (FAA-H-8083-30B, table of contents, via Open Textbook Library). Like mathematics, it supports the applied areas: ideas you meet here return as the reasoning underneath fluid, weight, and electricity questions.

Fundamentals of Electricity and Electronics (5–15%, Ch. 12) is the heaviest single area on the test, tied only with Ground Operations and Servicing (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). At the top of its band it is 9 of your 60 questions. It is also calculation-dense: Ohm's law, power, and series and parallel circuit work. Because every question has exactly one correct response and no partial credit (FAA-G-ACS-1 Companion Guide, Ch. 3), a calculation that is set up right but finished wrong scores the same as one you never learned. This area rewards worked problems, not just reading.

Weight and Balance (5–10%, Ch. 6: Aircraft Weight & Balance) is the second calculation cluster: weight, arm, and moment work, read against aircraft data and the figures in the testing supplement (FAA-H-8083-30B, table of contents, via Open Textbook Library; FAA Airman Knowledge Testing Matrix). The method is learnable and repeatable, which is good news: this is one of the areas where deliberate practice converts most directly into points.

The hands-on cluster: drawings, fluid lines, materials, and corrosion control

These four areas, all in the 5–10% band (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table), test whether you can recognize and work with the physical side of the job.

Aircraft Drawings (Ch. 4) tests reading the drawings and diagrams maintenance work is documented in, including the figure-based questions that use the FAA-CT-8080-4G testing supplement (FAA Airman Knowledge Testing Matrix). Familiarity with the supplement before test day is part of preparing for this area.

Fluid Lines and Fittings (Ch. 9) and Aircraft Materials, Hardware, and Processes (Ch. 7) are identification-and-application areas: the materials, hardware, lines, and fittings a mechanic handles, and the correct process for working with each (FAA-H-8083-30B, table of contents, via Open Textbook Library). Candidates with shop experience often find these the most familiar areas on the test, which makes them efficient points if you study the formal terms and specifications the questions use, rather than relying on habit alone.

Cleaning and Corrosion Control (Ch. 8) covers how aircraft are cleaned and how corrosion is identified, treated, and prevented (FAA-H-8083-30B, table of contents, via Open Textbook Library). It is a steady, learnable area: a complete pass through the chapter and a set of practice questions covers most of what the band can ask.

The procedures and rules cluster: inspection, regulations, ground operations, and human factors

Inspection Concepts and Techniques (5–10%, Ch. 10) tests how inspections are approached and performed, supported by the handbook's Chapter 11 on hand tools and measuring devices (FAA-H-8083-30B, table of contents, via Open Textbook Library).

Regulations, Maintenance Forms, Records, and Publications (5–10%, Ch. 2) is the paperwork-and-rules area: what the regulations require, and how maintenance is documented in forms, records, and publications (FAA-H-8083-30B, table of contents, via Open Textbook Library). The handbook's Chapter 13, Mechanic Privileges & Limitations, belongs with your study for this area. These questions are specific and learnable: read the rule, then answer questions on that rule while it is fresh.

Ground Operations and Servicing (5–15%, Ch. 1: Safety, Ground Operations, & Servicing) shares the heaviest band on the test with electricity (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). It is easy to under-study because the material feels like common sense from the shop floor. Do not: at up to 9 questions, it can carry as much of your score as the electricity work everyone worries about.

Human Factors (5–10%, Ch. 14) covers the human side of maintenance error and safety, and it closes the handbook (FAA-H-8083-30B, table of contents, via Open Textbook Library). It is usually the most readable chapter in the book, which makes it a good area to finish a study session with, but it is still 3–6 questions and should not be skipped.

How should you use these weights to study?

Study in proportion, and let the arithmetic set your priorities. You need 42 of 60 correct, so you can miss 18 questions (FAA-G-ACS-1 Companion Guide, Ch. 3). A single weak area at the top of the 5–15% band can account for 9 of those 18 misses by itself. That is why Fundamentals of Electricity and Electronics and Ground Operations and Servicing get the largest shares of your time, why the calculation cluster gets worked problems rather than re-reading, and why no 5–10% area gets zero time: six neglected small areas, at up to 6 questions each, can cost more than one big one.

Pacing follows the same math. 120 minutes for 60 questions is 2 minutes per question (FAA-G-ACS-1 Companion Guide, Ch. 3). Recall questions should take less, banking time for the calculations. Practicing by subject area, under time, is how you find out whether your personal split matches the FAA's published one, or whether one area is quietly eating your margin.

What this article can't do for you

This breakdown tells you what the exam contains and how it is weighted. It cannot tell you where you stand inside it. Two candidates can both read that electricity is up to 15% of the test and be in opposite positions: one solid on circuits and weak on regulations, the other the reverse. Reading the weights does not reveal your own pattern of misses, and guessing at it wastes the study time this article just helped you allocate.

That is what a diagnostic is for. Upward Prep's free 25-question AMG practice test mirrors the ACS subject weights, times you like the real thing, and gives cited explanations for every answer, so you can put your hours into the subject areas that are actually costing you points. Try the free AMG practice test →

Frequently asked questions

what is on the general exam

The General exam, the AMG, is 60 multiple-choice questions drawn from 12 ACS knowledge areas: Fundamentals of Electricity and Electronics, Aircraft Drawings, Weight and Balance, Fluid Lines and Fittings, Aircraft Materials, Hardware, and Processes, Ground Operations and Servicing, Cleaning and Corrosion Control, Mathematics, Regulations, Maintenance Forms, Records, and Publications, Physics for Aviation, Inspection Concepts and Techniques, and Human Factors (FAA-G-ACS-1 Companion Guide).

general test topics

The topic list is the 12 areas above, and each one maps to a chapter of the FAA's study handbook, FAA-H-8083-30B, from Chapter 1 (Safety, Ground Operations, & Servicing) to Chapter 14 (Human Factors) (FAA-H-8083-30B, table of contents, via Open Textbook Library). If a topic you are studying does not match one of the 12 areas or their supporting chapters, it is probably material for the Airframe or Powerplant test instead.

amg test breakdown

Two areas carry 5–15% of the test each: Fundamentals of Electricity and Electronics, and Ground Operations and Servicing. The other ten areas carry 5–10% each (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). On 60 questions, that works out to roughly 3–9 questions from each heavy area and 3–6 from each of the rest.

mathematics physics electricity

These are three separate ACS areas, and electricity is the heavyweight: Fundamentals of Electricity and Electronics is 5–15% of the test, while Mathematics and Physics for Aviation are 5–10% each (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). Study them in that order: mathematics first as the foundation, physics next, then electricity, where both come back as calculations you have to finish correctly under time.

how many questions

There are 60 questions on the AMG, with a 2.0-hour time limit and a 70% passing score, which means 42 correct answers and 2 minutes per question (FAA-G-ACS-1 Companion Guide, Ch. 3). The Airframe and Powerplant tests that follow it are longer, at 100 questions each with the same 2.0-hour limit and 70% bar (FAA-G-ACS-1 Companion Guide, Ch. 3).