AMP vs AMA: Powerplant vs Airframe — Which Is Harder?
In an amp vs ama comparison, neither test is harder on paper: both have 100 multiple-choice questions, a 2.0-hour limit, and a 70% passing score (FAA Airman Knowledge Testing Matrix). What differs is the kind of hard: the AMA spreads across 15 subject areas, while the AMP concentrates on 13 engine-focused areas (FAA-G-ACS-1 Companion Guide).
How do the two tests compare side by side?
On format, they do not differ at all. The differences are all in content, and this table is the whole comparison in one view:
| AMP (Powerplant) | AMA (Airframe) | |
|---|---|---|
| Full name | Aviation Mechanic Powerplant | Aviation Mechanic Airframe |
| Rating it serves | Powerplant | Airframe |
| Questions | 100 | 100 |
| Time limit | 2.0 hours | 2.0 hours |
| Passing score | 70% (70 correct) | 70% (70 correct) |
| Pace | 72 seconds per question | 72 seconds per question |
| ACS subject areas | 13 (Section III) | 15 (Section II) |
| Heaviest areas (5–15% each) | Reciprocating Engines; Engine Electrical Systems | Metallic Structures; Airframe Inspection |
| All other areas | 5–10% each | 5–10% each |
Sources: question counts, time limits, and passing scores per the FAA Airman Knowledge Testing Matrix and 14 CFR 65.17; subject-area counts and weight bands per the FAA-G-ACS-1 Companion Guide; ratings per 14 CFR 65.73.
Read the table from the top down and the honest answer starts to form. The FAA gives you the same number of questions, the same clock, and the same bar on both tests (FAA Airman Knowledge Testing Matrix). Nobody gets an easier format. What you get instead is a different spread of material: two more subject areas to cover on the Airframe side, and a tighter, engine-only focus on the Powerplant side (FAA-G-ACS-1 Companion Guide).
What does each test actually cover?
The AMP is engines and everything that keeps an engine running. Its 13 subject areas are Reciprocating Engines, Turbine Engines, Engine Inspection, Engine Instrument Systems, Engine Fire Protection Systems, Engine Electrical Systems, Engine Lubrication Systems, Ignition and Starting Systems, Engine Fuel and Fuel Metering Systems, Reciprocating Engine Induction and Cooling Systems, Turbine Engine Air Systems, Engine Exhaust and Reverser Systems, and Propellers (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section III). Every area sits on or around the engine, including the surprise topic: propellers are a Powerplant subject, not an Airframe one (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section III).
The AMA is the aircraft itself, minus its engines. Its 15 subject areas are Metallic Structures, Non-Metallic Structures, Flight Controls, Airframe Inspection, Landing Gear Systems, Hydraulic and Pneumatic Systems, Environmental Systems, Aircraft Instrument Systems, Communication and Navigation Systems, Aircraft Fuel Systems, Aircraft Electrical Systems, Ice and Rain Control Systems, Airframe Fire Protection Systems, Rotorcraft Fundamentals, and Water and Waste Systems (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II). It reaches from sheet metal to radios to rotorcraft, which is why it carries the most subject areas of the three mechanic writtens (FAA-G-ACS-1 Companion Guide).
Four topics appear on both lists — electrical systems, fuel systems, instrument systems, and fire protection — but scoped to different hardware: the engine side on the AMP and the aircraft side on the AMA (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Sections II and III). Passing one test's version of electrical does not mean you know the other's; the questions are written against different systems.
So which one is actually harder?
There is no official ranking to hide behind here: the FAA publishes the format and the standards for both tests, not a verdict on which is harder (FAA Airman Knowledge Testing Matrix; FAA-G-ACS-1 Companion Guide). What the published structure does support is this: the two tests are hard in different ways, and which way hurts depends on the candidate.
The AMA is harder by breadth. Fifteen subject areas means fifteen separate bodies of material to keep current at once, and the smaller areas are not small enough to skip: thirteen of the fifteen areas carry 5–10% each, so together they are most of the test (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). A candidate who studies structures and the big systems deeply but never opens Rotorcraft Fundamentals or Water and Waste Systems can walk in already exposed on up to 20 of the 100 questions, out of only 30 they are allowed to miss (FAA-G-ACS-1 Companion Guide, Ch. 3). Breadth punishes narrow study plans.
The AMP is harder by concentration. Its 13 areas all orbit one machine, so the questions can go deeper into how systems interact: an instrument indication, a fuel metering fault, and an ignition problem can all be the same engine telling one story (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section III). The two heavyweight areas make the point: Reciprocating Engines and Engine Electrical Systems can each supply up to 15 of your 100 questions, so one weak engine area can cost half of everything you are allowed to miss (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions table). Concentration punishes shallow understanding of the core.
Your background usually decides which one you feel. If your experience is engines — shop work, automotive or diesel crossover, a powerplant-heavy school block — the AMP's material will read as familiar territory studied formally, while the AMA's structures and systems spread is all new at once. If your experience is structures and airframe systems, the reverse is true, and turbine theory is often the least familiar block on either test for candidates whose background is piston work (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Sections II and III). Neither background removes the other test's heavyweight areas; it only changes which test asks you to learn the most new material per question.
Does the order you take them in matter?
Less than candidates expect. Both tests sit behind the same gate: you must pass each section of the written test before applying for the oral and practical tests for that rating (14 CFR 65.75), and all of the prescribed tests must be passed within a period of 24 months (14 CFR 65.71). Within that window, the Airframe and Powerplant writtens belong to separate ratings, so they can be taken in either order (14 CFR 65.73).
Most candidates simply follow their school's sequence or the order their documented experience supports. The experience rule is the same shape for both: at least 18 months of practical experience appropriate to the one rating sought, or at least 30 months concurrently performing duties appropriate to both ratings, or graduation from a certificated aviation maintenance technician school (14 CFR 65.77; 14 CFR 65.71). If you fail either test, the retest rule is also identical: you may retest after 30 days, or sooner with a signed statement certifying you received additional instruction in each subject you failed (14 CFR 65.19).
One practical point in favor of taking your stronger test first: the areas you miss on a written are not finished with you when you pass. Your Airman Knowledge Test Report prints ACS codes for the knowledge areas behind your missed questions, and those deficient areas are retested during the oral portion of the practical test (FAA-G-ACS-1 Companion Guide). Banking the test you are readiest for, with fewer deficient areas to revisit, makes the oral that follows it narrower.
Is AMP the same as A&P?
No, and this confusion sits underneath most amp vs ama searching. AMP is one knowledge test: the Powerplant written (FAA Airman Knowledge Testing Matrix). A&P is not a test at all. It is shorthand for the full mechanic certificate carrying both ratings, Airframe and Powerplant (14 CFR 65.73).
That means the comparison in this article is not really a choice between two credentials. The two ratings are issued under the same subpart, and a mechanic certificate can carry the Airframe rating, the Powerplant rating, or both (14 CFR 65.73). Most candidates aiming at the full A&P take both writtens, plus the General written, and then the oral and practical tests for each rating with a Designated Mechanic Examiner (14 CFR 65.75; 14 CFR 65.79). Choosing to sit one written before the other is a sequencing decision, not a career fork — unless you deliberately stop at a single rating, which the rules allow (14 CFR 65.73).
Pay does not break the tie either. The Bureau of Labor Statistics reports one occupation, aircraft mechanics and service technicians, for mechanics on both sides of this comparison, with a median annual wage of $79,870 in May 2025 (BLS Occupational Outlook Handbook: Aircraft and Avionics Equipment Mechanics and Technicians). BLS does not publish a separate median for Airframe-only versus Powerplant-only mechanics in that handbook, so any claim that one rating simply pays more is not coming from the national data.
Which should you focus on first?
- Choose the AMP first if engines are your background or your school teaches the powerplant block first: your study time goes into formalizing what you partly know, across 13 connected areas (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section III).
- Choose the AMA first if structures and aircraft systems are your strength: you bank the broadest test, all 15 areas, while that material is freshest (FAA Aviation Mechanic ACS, FAA-S-ACS-1, Section II).
- Choose neither first if you have not passed the General written yet: it is the shared foundation, at 60 questions with the same 2.0-hour limit and 70% bar, and its material is what both rating tests assume (FAA Airman Knowledge Testing Matrix).
Whichever you sit first, study it the way its structure demands. For the AMA, that means a checklist across all 15 areas, with worked problems for the structures heavyweights. For the AMP, it means learning engines as connected systems, with the deepest time in Reciprocating Engines and Engine Electrical Systems (FAA-G-ACS-1 Companion Guide, percentage-of-test-questions tables).
What this article can't do for you
This article can show you that the two tests share a format and split on breadth versus depth (FAA Airman Knowledge Testing Matrix; FAA-G-ACS-1 Companion Guide). It cannot tell you which one is harder for you, because that depends on where your own knowledge is thin, and no comparison table can measure that. A candidate strong on engines and untested on structures will experience these two exams in the opposite order from a candidate with the reverse background.
That measurement is what a diagnostic is for. Upward Prep's free 10-question diagnostic for the AMP mirrors the Powerplant ACS subject weights across its 1,000-question bank and gives cited explanations for every answer, so you can see which engine areas would cost you questions before you schedule the real test — and the matching free 10-question AMA diagnostic does the same against the Airframe areas and its 1,000-question bank. Take the one for the written you plan to sit first. Try the free AMP practice test → · Try the free AMA practice test →
Frequently asked questions
powerplant vs airframe which is harder
Neither, as a blanket statement. Both tests are 100 questions in 2.0 hours with a 70% passing score (FAA Airman Knowledge Testing Matrix). The AMA is harder by breadth, with 15 subject areas to keep current; the AMP is harder by concentration, with 13 engine-focused areas and two heavyweight areas that can each reach 15% of the test (FAA-G-ACS-1 Companion Guide). The harder test for you is the one whose heavyweight areas sit furthest from your experience.
which written first
General first, then the Airframe and Powerplant writtens in either order. Each rating stands on its own (14 CFR 65.73), you must pass each written section before applying for that rating's oral and practical tests (14 CFR 65.75), and all prescribed tests must be passed within a period of 24 months (14 CFR 65.71). Most candidates follow their school's sequence or take the rating their experience supports first.
amp vs a&p
They are different kinds of thing. AMP is a single knowledge test, the Powerplant written (FAA Airman Knowledge Testing Matrix). A&P is shorthand for the mechanic certificate with both ratings, Airframe and Powerplant, on it (14 CFR 65.73). Passing the AMP is one step toward the A&P; it is not the certificate itself, which also requires the oral and practical tests (14 CFR 65.79).
hardest faa written
There is no official hardest mechanic written. The three tests share the same 70% passing grade (14 CFR 65.17), and the two 100-question tests, the AMA and the AMP, share the tightest pacing at 72 seconds per question, while the 60-question General test allows 2 minutes per question in the same 2.0 hours (FAA Airman Knowledge Testing Matrix). Candidates usually call hardest whichever 100-question test covers the material furthest from their own background.
