How Many Questions Are on the AMP Exam?
How many questions are on the AMP exam? There are 100 scored multiple-choice questions on the AMP, the FAA Aviation Mechanic Powerplant knowledge test, and you have 2.0 hours to finish them, which is 72 seconds per question, with 70% — 70 correct — required to pass (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17).
Try 3 real AMP questions
Real questions from the AMP bank, with the cited explanation for every answer. Tap an answer to check it.
1. A green FUEL PUMP ON annunciator illuminates. This tells the crew:
Advisory annunciators (green, blue, or white) convey routine information about normal system status — for example, that a fuel pump is on. They require no corrective action.
2. The Brayton cycle — the thermodynamic cycle of a gas turbine engine — is also known as the:
The Brayton cycle is a variable-volume, constant-pressure cycle of intake, compression, expansion (power), and exhaust. It is commonly called the constant-pressure or continuous-combustion cycle.
3. A reciprocating engine develops 200 brake horsepower while consuming 100 pounds of fuel per hour. What is its specific fuel consumption (SFC)?
SFC is the fuel weight in pounds per hour per horsepower: SFC = fuel flow ÷ horsepower = 100 pph ÷ 200 hp = 0.5 lb/hp/hr. Lower SFC means more economical operation.
Is 100 the full count you will actually sit for?
Almost. The 100 is the count of scored questions, and it is the number your result is built from. The FAA's testing matrix is explicit that the listed number of questions does not include validation questions (FAA Airman Knowledge Testing Matrix). Validation questions are questions the FAA uses to accumulate data for statistical analysis of test question validity and performance, they are not scored, and they do not count for or against your final score (FAA Airman Knowledge Testing Matrix).
That distinction matters for two practical reasons. First, you may see more than 100 questions on screen, and the extra ones are not a sign you were given the wrong test. Second, you cannot tell which questions are validation questions while you test, so answer every question as if it counts — because 100 of them do. The time math stays the same: the listed allotted time includes the time required to respond to validation questions, so your 2.0 hours covers everything in front of you, scored or not (FAA Airman Knowledge Testing Matrix). Plan around the scored number: every pacing budget, pass calculation, and practice target in this article is built on 100 scored questions in 2.0 hours (FAA Airman Knowledge Testing Matrix).
How does the AMP count compare with the General and Airframe tests?
The AMP is tied for the longest of the three mechanic writtens:
| Test | Scored questions | Time | Passing score | Correct answers needed |
|---|---|---|---|---|
| AMG (General) | 60 | 2.0 hours | 70% | 42 |
| AMA (Airframe) | 100 | 2.0 hours | 70% | 70 |
| AMP (Powerplant) | 100 | 2.0 hours | 70% | 70 |
| All three writtens | 260 | 6.0 hours total | 70% on each | 182 |
Source: question counts, times, and passing scores per the FAA Airman Knowledge Testing Matrix; the correct-answers column is the 70% line applied to each count, and the totals row is the three tests added together.
Two things follow from that table. First, the Powerplant test is 40 questions longer than the General test, inside the same 2.0 hours (FAA Airman Knowledge Testing Matrix). Candidates who found the General pace comfortable should not expect the AMP to feel the same. Second, there is no averaging across the three. The minimum passing grade of 70 percent applies to each test prescribed under Part 65 (14 CFR 65.17), so the 100-question Powerplant test has to be passed on its own 70 correct answers. A strong Airframe score does not repair a shortfall here.
That is also why the count is worth asking about this test specifically. AMP on its own is a single knowledge test — the Powerplant written — not the A&P certificate itself. The certificate requires the applicable knowledge tests plus the oral and practical exams for the rating sought (FAA-G-ACS-1 Companion Guide). The 100 questions are one step in that path, and they are judged on their own.
What does 100 questions in 2 hours mean for pacing?
It means 72 seconds per question: 120 minutes divided by 100 questions (FAA Airman Knowledge Testing Matrix). That is an average, not a rule for any single question. A short recall question on lubrication or fire protection may take you well under a minute. A question that asks you to trace a fuel-metering or electrical fault from cause to indication may fairly take longer. The average only works if the fast questions bank time for the slow ones.
A simple way to keep the average honest is to check your position against the clock at four points:
| Clock elapsed | Questions you want finished | What it tells you |
|---|---|---|
| 30 minutes | 25 | You are on the 72-second average |
| 60 minutes | 50 | Half the test in half the time |
| 90 minutes | 75 | 25 questions left with 30 minutes to work them and review |
| 120 minutes | 100 | Time expires |
Source: checkpoints are the 2.0-hour limit divided evenly across the 100 scored questions (FAA Airman Knowledge Testing Matrix).
If you fall behind at a checkpoint, the fix is not to rush the next system question. It is to stop spending three minutes on questions you do not know: make your best choice, mark the question in your mind, and move. Because each question is independent and has a single correct response (FAA-G-ACS-1 Companion Guide), a stalled question earns nothing extra for the time it takes from the questions behind it.
For comparison, the pacing is much looser on the test that comes first. The General test puts 60 questions inside the same 2.0 hours (FAA Airman Knowledge Testing Matrix), which is 2 minutes per question. The AMP demands nearly twice that speed, at 72 seconds per question. If your only timed practice so far was at the General pace, your AMP pace has not been tested yet.
Some AMP questions point at figures in the testing supplement for the General, Airframe, and Powerplant tests, FAA-CT-8080-4G (FAA Airman Knowledge Testing Matrix). Finding and reading a supplement figure is part of the time those questions take, so practice with figures, not just with text questions, if you want your practice pacing to match the real 72 seconds.
How are the 100 questions spread across the 13 subject areas?
Evenly enough that no area can be skipped, and unevenly enough that two areas deserve extra time. The 100 questions are drawn from the 13 knowledge areas in Section III of the Aviation Mechanic ACS, FAA-S-ACS-1 (FAA-G-ACS-1 Companion Guide). The Companion Guide assigns each area a percentage band: Reciprocating Engines and Engine Electrical Systems carry 5–15% of the test each, and the other eleven areas carry 5–10% each (FAA-G-ACS-1 Companion Guide).
Applied to 100 questions (FAA Airman Knowledge Testing Matrix), those bands look like this:
| Subject area | Share of the test | Questions (of 100) |
|---|---|---|
| Reciprocating Engines | 5–15% | 5–15 |
| Engine Electrical Systems | 5–15% | 5–15 |
| Turbine Engines | 5–10% | 5–10 |
| Engine Inspection | 5–10% | 5–10 |
| Engine Instrument Systems | 5–10% | 5–10 |
| Engine Fire Protection Systems | 5–10% | 5–10 |
| Engine Lubrication Systems | 5–10% | 5–10 |
| Ignition and Starting Systems | 5–10% | 5–10 |
| Engine Fuel and Fuel Metering Systems | 5–10% | 5–10 |
| Reciprocating Engine Induction and Cooling Systems | 5–10% | 5–10 |
| Turbine Engine Air Systems | 5–10% | 5–10 |
| Engine Exhaust and Reverser Systems | 5–10% | 5–10 |
| Propellers | 5–10% | 5–10 |
Source: percentage bands per the FAA-G-ACS-1 Companion Guide; question counts are those bands applied to the 100-question test (FAA Airman Knowledge Testing Matrix).
Read the table as ranges, not as a promised split. The FAA builds each test form inside these bands (FAA-G-ACS-1 Companion Guide), so your form will not match another candidate's question for question. What the ranges tell you is the shape of your risk: a single weak area at the top of the 5–15% band can cost 15 questions, half of everything you are allowed to miss, and six neglected 5–10% areas can cost far more than that. Propellers are the area candidates most often misfile — they sit in the Powerplant ACS, Section III, not in Airframe (FAA-G-ACS-1 Companion Guide) — so confirm your study list actually includes them before you count yourself covered.
How many questions can you miss and still pass?
Thirty. The passing score is 70% (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17), and 70% of 100 questions is 70 correct answers. Answer 70 correctly and you pass; answer 69 correctly and you do not, because 69 of 100 falls below the 70% line.
| Correct | Missed | Result |
|---|---|---|
| 100 | 0 | Pass |
| 90 | 10 | Pass |
| 85 | 15 | Pass |
| 80 | 20 | Pass |
| 75 | 25 | Pass |
| 70 | 30 | Pass — the minimum |
| 69 | 31 | Fail |
Source: the 70% passing score applied to the 100-question count (FAA Airman Knowledge Testing Matrix; 14 CFR 65.17).
Treat 30 as a margin to protect, not a budget to spend. Misses cluster where you are weakest, and one weak heavyweight area at the top of its band can account for half of them. Work until timed practice clears 70 with room to spare, so an unfamiliar form or a slow start spends margin you actually have.
Your result comes back on an Airman Knowledge Test Report (AKTR), and for tests with ACS coding the report prints ACS codes for the knowledge areas behind the questions you missed (FAA Airman Knowledge Testing Matrix). The count alone will not tell you where your misses sat. The codes will, and they are the useful part of the report whether you passed and are preparing for the oral or did not pass and are planning a retest.
How many questions should your practice tests have?
Two different lengths, doing two different jobs. Short sets tell you where you stand; only a full-length run tells you whether you can hold that standard across the whole test the FAA scores — 100 questions in 2.0 hours (FAA Airman Knowledge Testing Matrix).
- A short diagnostic samples the 13 subject areas quickly and shows you which areas your misses are coming from, so your study hours go to the areas that are actually costing you questions.
- A full 100-question timed run rehearses the real sitting: the 72-second average pace, the checkpoint rhythm, the supplement figures, and your focus at question 90 as well as question 5 (FAA Airman Knowledge Testing Matrix).
Do not judge readiness from untimed practice. A score earned without the clock does not test the skill this article is about: producing correct answers at 72 seconds per question for the full 2.0 hours (FAA Airman Knowledge Testing Matrix). When timed, full-length practice passes with margin — not exactly on 70 — the count has stopped being a risk.
What this article can't do for you
This article can tell you the exact shape of the test: 100 scored questions, 2.0 hours, 70 correct to pass, spread across 13 subject areas (FAA Airman Knowledge Testing Matrix). It cannot tell you how you would handle those 100 today. You might be fast and accurate on reciprocating engines and slow on turbine theory, so your real pace is nothing like the 72-second average. Or you might be even across most areas and quietly losing 8 or 10 questions in one you have not thought about since school. The count is the same for everyone; where your misses would fall is personal, and no article can measure it for you.
That measurement is what a diagnostic is for. Upward Prep's free 25-question AMP practice test mirrors the ACS subject weights, times you like the real thing, and gives cited explanations for every answer, so you can see which subject areas would use up your 30-miss margin first — and start your full-length practice from that knowledge instead of from a guess. Try the free AMP practice test →
Frequently asked questions
how many questions
There are 100 scored questions on the AMP (FAA Airman Knowledge Testing Matrix). The count does not include validation questions, which are unscored and do not count for or against your final score (FAA Airman Knowledge Testing Matrix). At 70% to pass, 100 questions means 70 correct answers and 30 you can miss (14 CFR 65.17).
amp practice test
Use practice in two lengths: a short diagnostic to find which of the 13 subject areas your misses come from, and a full timed run of 100 questions in 2.0 hours to rehearse the real test's pace of 72 seconds per question (FAA Airman Knowledge Testing Matrix). A practice score only predicts the real result when it was earned under the real count and the real clock.
what is on the powerplant exam
The Powerplant exam's 100 questions are drawn from 13 ACS subject areas: Reciprocating Engines, Turbine Engines, Engine Inspection, Engine Instrument Systems, Engine Fire Protection Systems, Engine Electrical Systems, Engine Lubrication Systems, Ignition and Starting Systems, Engine Fuel and Fuel Metering Systems, Reciprocating Engine Induction and Cooling Systems, Turbine Engine Air Systems, Engine Exhaust and Reverser Systems, and Propellers (FAA-G-ACS-1 Companion Guide). Reciprocating Engines and Engine Electrical Systems carry the heaviest bands, at 5–15% of the test each (FAA-G-ACS-1 Companion Guide).
is the powerplant written hard
By format, the Powerplant written is tied for the most demanding pace of the three mechanic tests: 100 questions in the same 2.0 hours the 60-question General test gets, at the same 70% passing score (FAA Airman Knowledge Testing Matrix). That works out to 72 seconds per question on the AMP, against 2 minutes per question on the General test. The difficulty candidates feel is usually breadth across 13 areas and that tight pace, not the percentage itself.
