How Many Questions Are on the CSPT Exam?
If you are asking how many questions are on the CSPT exam, the answer is 75 multiple-choice questions in 1 hour and 50 minutes: 60 scored questions count toward your result, and 15 unscored questions do not, and you cannot tell which is which while you test (PTCB Candidate Guidebook).
What do the three numbers — 75, 60, and 15 — actually mean?
The Guidebook states the format directly: the exam is multiple-choice and contains 75 questions, made up of 60 scored questions and 15 unscored questions, and each question lists four possible answers, only one of which is the correct or best answer (PTCB Candidate Guidebook). Scored means the question counts. Your result is built only from how you answer those 60 questions.
Unscored means the question does not count toward your result. The Guidebook does not give those 15 questions a separate label on screen, and that is the point you have to plan around: unscored questions are not identified and are randomly distributed throughout the exam, and a candidate's exam score is based on the responses to the 60 scored questions (PTCB Candidate Guidebook).
| Count | What it means | Counts toward your score? |
|---|---|---|
| 75 | Total questions you answer | You answer all of them |
| 60 | Scored questions | Yes — these build your result |
| 15 | Unscored questions | No |
Source: counts, format, and scoring treatment from the PTCB Candidate Guidebook.
The practical rule follows: do not try to spot the unscored questions, and do not coast on one that looks odd — it is just as likely to be one of the 60 that count (PTCB Candidate Guidebook). Treat all 75 as scored.
One clarification, because search results confuse this credential: this is PTCB's pharmacy sterile compounding specialty credential, not an entry-level exam and not the surgical sterile processing credential. You must be an active PTCB CPhT and qualify under one of two experience pathways to apply (ptcb.org CSPT page). Its content was republished on November 1, 2023 to reflect the revision to USP <797> (ptcb.org CSPT page).
How are the 60 scored questions divided?
The 60 scored questions are not spread evenly. The official content outline, republished November 1, 2023 for the revised USP <797>, breaks them down by domain like this (PTCB CSPT Content Outline; ptcb.org CSPT page):
| Domain | Share of exam | Scored questions (of 60) |
|---|---|---|
| Medications and Components | 17% | 10 |
| Facilities and Equipment | 22% | 13 |
| Sterile Compounding Procedures | 53% | 32 |
| Handling, Packaging, Storage, and Disposal | 8% | 5 |
| Total scored | 100% | 60 |
Source: domain shares from the PTCB CSPT Content Outline and the PTCB At-a-Glance: CSPT Exam; scored counts are the outline shares applied to 60 scored questions.
One domain carries the exam: Sterile Compounding Procedures alone is 32 of the 60 scored questions, more than the other three domains combined (PTCB CSPT Content Outline). Study in those proportions — sterile compounding procedures first — while remembering that the other three domains still hold 28 scored questions and decide close results.
You will not see the questions grouped by domain on test day. Exam items are presented in random order throughout the exam, even though the content is organized into four domains (PTCB Candidate Guidebook). The 15 unscored items sit on top of this table, not inside it: they are mixed through the sitting, they carry no domain label you can see, and they do not change the 60-question split above (PTCB Candidate Guidebook).
How much time do you get per question?
You have up to 110 minutes — 1 hour and 50 minutes — to complete the exam (PTCB At-a-Glance: CSPT Exam). Be prepared to commit 2 hours in total: a 5-minute tutorial, the 1-hour-and-50-minute exam, and a 5-minute post-exam survey (PTCB Candidate Guidebook). Divide 110 minutes by 75 questions and the budget is about 88 seconds per question. That is an average, not a rule for any single item: a short facilities question you know cold may take you 30 seconds, and a scenario question about an aseptic manipulation may fairly take two minutes. What you cannot afford is a pattern of long stalls, because the average has no slack built into it.
Two built-in features help if you use them deliberately. A collapsible countdown timer sits in the top right corner of the exam window, and if you finish all the questions before time runs out, you can review and change answers until the 110-minute limit expires (PTCB At-a-Glance: CSPT Exam). Plan your sitting in blocks instead of watching one global clock. At the halfway point — about 55 minutes in — you want to be at or past question 38. If you are behind, the fix is pace, not panic: make your best choice, flag the question for that end-of-exam review, and move. A question you cannot solve in three minutes is costing you another question later in the exam.
The exam is computer-based and is administered through online proctored testing and in person at more than 1,400 Pearson Test Centers nationwide, including more than 100 military bases (ptcb.org CSPT page). After receiving your authorization to schedule email, you have 90 days to schedule and take the exam (ptcb.org CSPT page).
Why do some sites say 60 questions?
Because two different numbers from the same PTCB statements get repeated on their own. The Guidebook counts 60 scored questions and 15 unscored questions inside the 75-question total (PTCB Candidate Guidebook). A guide that says "60 questions" is usually counting only the questions that affect your score and skipping the unscored items without saying so.
Both answers are describing the same exam. They are counting different things:
- 75 is what you sit for and answer.
- 60 is what your score is built from.
- 15 is the unscored remainder mixed through the same sitting.
For planning, use 75: your pacing and stamina have to cover 75 questions in 110 minutes (PTCB At-a-Glance: CSPT Exam). For understanding your score, use 60. If a source gives you a total matching neither number, check it against PTCB's Guidebook before you trust the page.
How many questions do you need to get right to pass?
There is no official fixed number, and any site that gives you an exact one is guessing. The passing score and candidate results are reported as scaled scores: the passing scaled score for the CSPT exam is 1,400, and the range of possible scores is 1,000 to 1,600 (PTCB Candidate Guidebook). A panel of subject-matter experts established that passing score using the modified-Angoff method, in which panel members evaluate individual test questions and estimate the percentage of qualified pharmacy technicians who would be able to answer each question correctly (PTCB Candidate Guidebook).
That is why the tidy arithmetic misleads. A 1,400 is not a percentage of the 60 scored questions, and it is not a raw count you can work backwards from. Your score is based on your responses to the 60 scored questions, but PTCB reports the outcome on the 1,000–1,600 scaled range, not as a count of correct answers (PTCB Candidate Guidebook).
The honest way to use practice scores is as a margin, not a conversion:
| Your practice accuracy on scored-style questions | Correct out of 60 | How to read it |
|---|---|---|
| Around 60% | Around 36 | No margin — a rough day can put you below the line |
| Around 70% | Around 42 | Closer, but still dependent on which domains your misses sit in |
| 80% or better, consistently | 48 or better | A working margin above the passing standard |
Read the table as guidance, not as a promise about your scaled score. Do not study until you can just clear the bar on a good day — study until clearing it would still happen on a bad one, and weight the check by domain: a miss in the 32-question Sterile Compounding Procedures domain costs more than the same miss rate in the 5-question Handling, Packaging, Storage, and Disposal domain (PTCB CSPT Content Outline).
When do you get your results?
Official score reports are typically available within three weeks of your CSPT exam date, and once yours is available, you will be notified by email (PTCB At-a-Glance: CSPT Exam). PTCB does not provide results by phone or fax, and it cannot expedite processing (PTCB Receiving Scores and Certificates; PTCB At-a-Glance: CSPT Exam).
That wait matters because passing is only one requirement: candidates must also submit the CSPT Competency Attestation Form, and all requirements, including a passing score, must be completed within the one-year Candidacy Eligibility Window (PTCB Candidate Guidebook).
What happens to the count if you have to retake it?
The count does not change on a retake — it is the same 75-question format — but the window around trying again is specific. CSPT candidates are eligible to take the exam two times within a 12-month period, a new CSPT Competency Attestation Form is required for each candidacy window, and each attempt requires a fee (PTCB At-a-Glance: CSPT Exam). Once your application is approved, you are given a 90-day authorization period to schedule and take the exam (PTCB At-a-Glance: CSPT Exam).
If the window expires first, earlier work does not carry over: all previous requirements, including a passing score, are deemed ineligible for future windows (PTCB Candidate Guidebook). That is why the first sitting deserves a real plan, weighted to the 32-question domain (PTCB CSPT Content Outline).
How does the real count compare to practice tests?
A practice test can be shorter than the real exam and still be useful. A short diagnostic tells you where you stand by domain, but it cannot tell you whether your pace survives question 70, because it never takes you there. Only a full-length, timed run — 75 questions in 110 minutes (PTCB At-a-Glance: CSPT Exam) — rehearses the full sitting.
Use the two tools for two different jobs:
- Short sets and diagnostics find your weak domains quickly, so your study hours go where the points are — concentrated in Sterile Compounding Procedures (32 scored questions) and Facilities and Equipment (13 scored questions) (PTCB CSPT Content Outline).
- Full-length timed runs train the roughly 88-second pace and the stamina the real 75-question sitting demands (PTCB At-a-Glance: CSPT Exam).
Upward Prep's CSPT bank holds 600 questions, blueprint-weighted to the same 17/22/53/8 outline, so both jobs can be done against the current domain split rather than an even one.
What this article can't do for you
This article can tell you exactly what you will sit for: 75 questions, 60 that count, 15 that do not, 110 minutes of exam time, and one domain worth more than the other three combined (PTCB Candidate Guidebook; PTCB CSPT Content Outline). It cannot tell you how those 75 questions will treat you — whether your pace holds at about 88 seconds a question, which domain will cost you points, or whether your USP <797> knowledge is current today or quietly out of date.
That is what a diagnostic is for. Upward Prep's free 10-question CSPT diagnostic shows you your readiness by domain, with cited explanations for every answer, so you can put your hours into the domains that are actually costing you points before you commit to full-length timed runs. It takes minutes, and it turns this public count into a personal starting point. Try the free CSPT practice test →
Frequently asked questions
how many questions are on the cspt exam
There are 75 questions on the CSPT exam: 60 scored questions and 15 unscored questions, with up to 110 minutes (1 hour and 50 minutes) to complete it (PTCB Candidate Guidebook; PTCB At-a-Glance: CSPT Exam). Only the 60 scored questions count toward your result, and the unscored questions are not identified (PTCB Candidate Guidebook).
how many multiple choice questions are on the cspt exam
All 75 questions are multiple choice. The exam is multiple-choice, each question lists four possible answers with only one correct or best answer, and the total is 60 scored questions plus 15 unscored questions (PTCB Candidate Guidebook).
how long is the cspt exam
You have up to 110 minutes (1 hour and 50 minutes) to complete the 75 questions, and you should be prepared to commit 2 hours in total for the 5-minute tutorial, the exam, and the 5-minute post-exam survey (PTCB At-a-Glance: CSPT Exam; PTCB Candidate Guidebook). That works out to about 88 seconds per question.
how many questions do you need to get right to pass the cspt exam
There is no official exact number. Passing is a scaled score of 1,400 or higher on a 1,000–1,600 scale, and your score is based on your responses to the 60 scored questions (PTCB Candidate Guidebook). PTCB reports the outcome as a scaled score, not as a count of correct answers, so treat any exact "you need X correct" figure as an estimate and aim for a consistent margin in practice instead.
what score do you need to pass the cspt exam
You need a passing scaled score of 1,400, on a range of possible scores from 1,000 to 1,600 (PTCB Candidate Guidebook). The passing score was established by a panel of subject-matter experts using the modified-Angoff method (PTCB Candidate Guidebook).
when do you get cspt exam results
Official score reports are typically available within three weeks of your CSPT exam date, and you are notified by email once your official score report is available (PTCB At-a-Glance: CSPT Exam). PTCB cannot expedite the processing of exam results or certification information (PTCB At-a-Glance: CSPT Exam).
