What's Actually on the CSPT Exam: Domain-by-Domain Breakdown
What is on the CSPT exam is 75 multiple-choice questions covering hazardous and non-hazardous compounded sterile preparations across four domains: Medications and Components (17%), Facilities and Equipment (22%), Sterile Compounding Procedures (53%), and Handling, Packaging, Storage, and Disposal (8%), with 60 questions scored and 15 unscored (PTCB Candidate Guidebook; ptcb.org CSPT page).
Try 3 real CSPT questions
Real questions from the CSPT bank, with the cited explanation for every answer. Tap an answer to check it.
1. When a drug is compounded at a higher-than-usual concentration, which stability concern increases?
Every drug has a solubility limit in a given vehicle; higher concentrations approach or exceed that limit, increasing precipitation risk. Concentration is a key physical-stability factor checked during verification.
Source: USP <797> (current revision) — physical stability factors (paraphrased)
2. TPN is classified as a high-alert medication because:
TPN is high-alert because its complexity — dozens of components, precise electrolyte dosing, calcium-phosphate precipitation risk — means compounding errors can be fatal (e.g., hyperkalemia, hypoglycemia, emboli from precipitates). High-alert status demands independent double-checks.
Source: ISMP high-alert medication list; USP <797> (paraphrased)
3. In addition to sterility, ophthalmic preparations are formulated to be near-isotonic and pH-balanced because:
The eye tolerates solutions close to tear pH (~7.4) and isotonicity; hypotonic, hypertonic, or extreme-pH drops cause stinging, reflex tearing (which washes out the drug), and corneal irritation. Comfort and tolerability drive these formulation targets.
Source: Ophthalmic formulation references (paraphrased)
Where does this breakdown come from?
Everything below comes from PTCB's official CSPT Content Outline, the document that lists the knowledge areas required on the exam (PTCB CSPT Content Outline; ptcb.org CSPT page). PTCB also publishes a separate list of medications referenced in the CSPT exam and a list of external references candidates can use to prepare (ptcb.org CSPT page).
One clarification first, because search results confuse it constantly: this is PTCB's pharmacy sterile compounding specialty credential, the Certified Compounded Sterile Preparation Technician. It is not the surgical sterile processing credential for reprocessing instruments. The exam covers hazardous and non-hazardous Compounded Sterile Products, or CSPs (PTCB).
What are the four domains at a glance?
| Domain | Share of exam | Scored questions (of 60) |
|---|---|---|
| Medications and Components | 17% | 10 |
| Facilities and Equipment | 22% | 13 |
| Sterile Compounding Procedures | 53% | 32 |
| Handling, Packaging, Storage, and Disposal | 8% | 5 |
| Total scored | 100% | 60 |
The percentages and the scored-question counts are PTCB's official domain weights for the 60 scored questions (PTCB CSPT Content Outline). The other 15 questions are unscored pretest questions, randomly distributed and not identified, so your score is based only on your responses to the 60 scored questions (PTCB Candidate Guidebook).
Read the table plainly: Sterile Compounding Procedures alone is more than the other three domains combined. That single fact should shape your whole study plan.
What is inside Medications and Components?
Medications and Components is 17% of the exam, or about 10 of the 60 scored questions (PTCB CSPT Content Outline). It is the knowledge you bring to the hood before any technique starts:
- The medications themselves — generic names, brand names, indications, side effects, and therapeutic classifications of medications used in sterile compounding (PTCB CSPT Content Outline)
- High-alert and narrow therapeutic index medications — types used in sterile compounding, with insulin, heparin, concentrated electrolytes, and chemotherapy given as examples in the outline (PTCB CSPT Content Outline)
- Dosage and administration — strength, dosage forms, routes, and administration instructions for compounded sterile preparations (PTCB CSPT Content Outline)
- Stability — drug-specific factors affecting the stability of CSPs, including containers, light, concentration, closure, temperature, and agitation (PTCB CSPT Content Outline)
- References — the type, purpose, and use of technical and clinical references for sterile compounding, such as package inserts and Safety Data Sheets (PTCB CSPT Content Outline)
- Beyond-use dates — factors that influence assigning a beyond-use date, including temperature, microbial limits of sterility, storage time, complexity of preparation, and location of preparation (PTCB CSPT Content Outline)
- Compatibility — physical and chemical compatibility criteria for components, including medications, ingredients, base solutions, filters, tubing, and closures (PTCB CSPT Content Outline)
This domain is not free points: beyond-use-date and compatibility questions connect directly to Domain 3, so weakness here costs you in two places.
What is inside Facilities and Equipment?
Facilities and Equipment is 22% of the exam, or about 13 of the 60 scored questions (PTCB CSPT Content Outline). It tests whether you understand the controlled environment you compound in:
- Primary engineering controls (PECs) — types and uses of laminar airflow workbenches and systems, biological safety cabinets, compounding aseptic isolators, and compounding aseptic containment isolators (PTCB CSPT Content Outline)
- Secondary engineering controls (SECs) — types including the anteroom, buffer area, segregated compounding areas, and containment segregated compounding areas (PTCB CSPT Content Outline)
- SEC features — air pressure differentials, HEPA filtration, ISO classification, and air changes per hour (PTCB CSPT Content Outline)
- Environmental parameters — temperature, pressure, and humidity parameters and tolerances for facilities and controlled environments (PTCB CSPT Content Outline)
- Environmental monitoring — procedures and requirements for conducting different types of monitoring, the action levels and parameters for assessing results from surface sampling, viable air sampling, and non-viable air sampling, and common factors contributing to out-of-specification results (PTCB CSPT Content Outline)
- Operational standards — rules for maintaining the safety and sterility of sterile compounding environments, such as food and drink restrictions and facility access (PTCB CSPT Content Outline)
Cleanroom veterans sometimes under-study this domain because the environment feels familiar. The exam asks what the controls, classifications, and monitoring results mean — not what your facility happens to do.
What is inside Sterile Compounding Procedures?
Sterile Compounding Procedures is 53% of the exam, or about 32 of the 60 scored questions — more than half of your score (PTCB CSPT Content Outline). It is also the longest section of the outline, with 21 numbered knowledge areas (PTCB CSPT Content Outline):
- Personnel training and competency — types, purpose, and procedures for required assessments such as gloved fingertip sampling and media fill, and the minimum frequency with which they must occur (PTCB CSPT Content Outline)
- Calculations — equations used to prepare CSPs, including infusion times, percent solutions, dilutions, alligations, dispensing quantities, days supply, ratios and proportions, quantities, doses, concentrations, and conversions (PTCB CSPT Content Outline)
- Health, hygiene, and garbing — personal health and hygiene requirements, hand hygiene procedures, types of garb and personal protective equipment, and procedures for donning, doffing, and disposal of garb and PPE for non-hazardous and hazardous drugs (PTCB CSPT Content Outline)
- Cleaning and disinfecting — properties and usage indications for deactivating, decontaminating, cleaning, and disinfecting agents, plus the procedures for equipment, PECs, and SECs for both non-hazardous and hazardous CSPs (PTCB CSPT Content Outline)
- Aseptic manipulation — principles and procedures for operating within horizontal and vertical airflow equipment, including first air and zone of turbulence, plus cleaning and disinfecting critical sites of components such as vials, ampules, and ports, and safety procedures for handling sharps (PTCB CSPT Content Outline)
- Records and measurement — documentation and record-keeping requirements such as the master formulation record and compounding record, and procedures to accurately weigh and measure components, including volumetric and gravimetric accuracy (PTCB CSPT Content Outline)
- Specialized preparations — procedures for parenteral nutrition and for specialized CSPs such as epidurals, intrathecals, cassettes, ophthalmics, and irrigations (PTCB CSPT Content Outline)
- Hazardous drugs and non-sterile starting components — procedures for compounding hazardous drugs, including negative pressure technique and closed system drug-transfer devices, and procedures for compounding from non-sterile components, including presterilization, terminal sterilization, filtration, and aseptic preparation (PTCB CSPT Content Outline)
- Defects and testing — potential signs of a defective CSP, such as discoloration, particulates, leaks, and turbidity, the conditions under which sterility, potency, and endotoxin testing are required, and procedures for interpreting those test results (PTCB CSPT Content Outline)
This breadth is why experience alone is not enough. You may perform garbing, media fill, and aseptic manipulation well at work and still miss questions on calculations, hazardous-drug cleaning sequences, or testing triggers that sit outside your daily assignment.
What is inside Handling, Packaging, Storage, and Disposal?
Handling, Packaging, Storage, and Disposal is 8% of the exam, or about 5 of the 60 scored questions, the smallest domain (PTCB CSPT Content Outline). It covers three things:
- Handling, labeling, packaging, storage, and disposal requirements for non-hazardous medications, components, sharps, and finished CSPs (PTCB CSPT Content Outline)
- The same handling, labeling, packaging, storage, and disposal requirements for hazardous medications, components, sharps, and finished CSPs (PTCB CSPT Content Outline)
- Types of and requirements for supplies used in packaging and repackaging, such as bags, syringes, glass, PVC, latex-free, and DEHP-free supplies (PTCB CSPT Content Outline)
Five questions is a small slice, but the hazardous-versus-non-hazardous distinction runs through it. Learn the two sets of requirements side by side rather than as one merged list, so a question can test the contrast.
How is the exam formatted, and how much time do you get?
The CSPT Exam is a computer-based, multiple-choice exam with 75 questions: 60 scored and 15 unscored, each with four possible answers and only one correct or best answer (PTCB Candidate Guidebook). Be prepared to commit 2 hours: a 5-minute tutorial, a 1-hour-and-50-minute exam, and a 5-minute post-exam survey (PTCB Candidate Guidebook).
That timing works out to about 88 seconds per question across the 75 questions in the 110-minute exam period. The pacing is workable if you keep moving, but Domain 3 scenario and calculation questions can take longer than a simple recall question, so bank time on the straightforward items.
The exam is administered through online proctored testing and in person at more than 1,400 Pearson Test Centers nationwide, including more than 100 military bases (ptcb.org CSPT page). You receive an unofficial score on screen after the post-exam survey, and official results are posted to your PTCB account within 8 to 10 weeks (PTCB Candidate Guidebook).
Why does the USP <797> revision matter for what is on the exam?
Because the current exam is not the pre-2023 exam. PTCB states plainly: "On November 1, 2023, the CSPT Exam was republished with updated content that reflects the recent revision to USP <797>" (ptcb.org CSPT page).
In practice, material built for the older USP <797> can teach outdated expectations for the topics Domain 3 tests most heavily — competency, garbing, cleaning, beyond-use dating, and monitoring. Check which version a resource is built on; if it does not say, treat that silence as a warning.
Who can take this exam in the first place?
The content matters only if you are eligible to sit for it, and the CSPT has a real gate. You must be an active PTCB CPhT and qualify under Pathway 1 — completion of, or enrollment in, a PTCB-Recognized Education/Training Program for the CSPT Program, plus one year of full-time continuous CSP work experience — or Pathway 2 — three years of full-time continuous CSP work experience within the last 8 years (ptcb.org CSPT page).
Once your application is approved, you receive a one-year Candidacy Eligibility Window and an authorization to schedule, and after that authorization you have 90 days to schedule and take the exam (ptcb.org CSPT page). During that window you must also submit the CSPT Competency Attestation Form, completed by a qualified supervisor (ptcb.org CSPT page).
If you do not yet hold an active CPhT, this breakdown is still useful as a map of where the specialty leads — but your next exam is the PTCE, not this one.
How should you use these weights to study?
Study in proportion, starting with Domain 3. Sterile Compounding Procedures is 32 of 60 scored questions (PTCB CSPT Content Outline), so roughly half of your study time belongs there, spread across its distinct clusters — competency testing, calculations, garbing and cleaning, aseptic manipulation, and specialized preparations — rather than spent only on the parts you already do at work.
Give Facilities and Equipment the next share, at 13 of 60 scored questions (PTCB CSPT Content Outline), with special attention to environmental monitoring and what its results mean. Then work Medications and Components at 10 of 60 (PTCB CSPT Content Outline), focusing on stability, compatibility, and beyond-use-date factors, because those ideas reappear inside procedure questions. Finish with the 5 scored questions in Handling, Packaging, Storage, and Disposal (PTCB CSPT Content Outline), learned as a hazardous-versus-non-hazardous comparison.
Throughout, check every resource against the current exam's basis: the content republished on November 1, 2023 for the revised USP <797> (ptcb.org CSPT page).
What this article cannot tell you
This breakdown tells you what the exam contains. It cannot tell you where you stand inside it. Two candidates can both read that Sterile Compounding Procedures is 53% of the exam (PTCB CSPT Content Outline) and be in completely different positions: one solid on aseptic manipulation and weak on calculations, the other the reverse. Reading the outline does not reveal your own pattern of misses, and it does not test whether your knowledge is current under the revised USP <797>.
That is what the free 25-question CSPT diagnostic is for. It gives you a domain-by-domain read on where you stand before you commit your hours, weighted the way the real exam is weighted. Try the free CSPT practice test →
Frequently asked questions
what is on the cspt exam
Four domains from PTCB's official content outline: Sterile Compounding Procedures (53%), Facilities and Equipment (22%), Medications and Components (17%), and Handling, Packaging, Storage, and Disposal (8%), across hazardous and non-hazardous compounded sterile preparations (PTCB CSPT Content Outline; PTCB).
how many questions are on the cspt exam
75 multiple-choice questions: 60 scored and 15 unscored pretest questions that are randomly distributed and not identified, in a 1-hour-and-50-minute exam period inside a 2-hour appointment (PTCB Candidate Guidebook).
cspt eligibility requirements
You must be an active PTCB CPhT, plus Pathway 1 (a PTCB-Recognized CSPT education/training program and one year of full-time continuous CSP work experience) or Pathway 2 (three years of full-time continuous CSP work experience within the last 8 years) (ptcb.org CSPT page).
is the cspt exam hard
PTCB does not publish an official CSPT pass rate, so judge difficulty by structure instead: Sterile Compounding Procedures alone is 53% of the exam (PTCB CSPT Content Outline), eligibility requires real compounded sterile preparation experience (ptcb.org CSPT page), and the current exam reflects the revised USP <797> (ptcb.org CSPT page). For an experienced compounding technician studying current material, it is a focused specialty exam. Without that experience, the eligibility gate comes first.
