Sterile Technique for the CST Exam: Aseptic Principles You Must Know

Sterile technique for the CST exam is the set of aseptic practices that keep the sterile field free of microorganisms: only sterile items touch sterile surfaces, the field stays in sight and above waist level, and any break is corrected at once (AORN Guideline for Sterile Technique; Principles of Sterile Technique).

Where does sterile technique sit on the CST exam?

At the center of it. NBSTSA's Examination Content Outline puts sterile technique in two heavily weighted places at once (NBSTSA 2025 CST Candidate Handbook):

Outline section Scored items Sterile-technique tasks named in the outline
Preoperative Preparation 19 Perform surgical scrub; don gown and gloves; check packages for sterile integrity and expiration; open sterile supplies using aseptic technique
Intraoperative Procedures 68 Maintain aseptic technique throughout the procedure, including handling breaks; follow Standard and Universal Precautions; gown and glove team members
Perioperative Care total 97 The domain that contains both sections above

Source for the item counts and task wording: (NBSTSA 2025 CST Candidate Handbook).

The preoperative items test whether you can create a sterile field correctly, in the right order. The intraoperative items test whether you can protect it for hours and fix it the moment something goes wrong. You need the principles, boundaries, and sequences held as decisions: in this situation, what do you do next?

What are the principles of asepsis you have to know cold?

Sterile technique refers to the practices used to establish and maintain a sterile field, and it is foundational in perioperative practice because it safeguards patients against surgical site infections (AORN Guideline for Sterile Technique). Surgical asepsis means the absence of all microorganisms within an invasive procedure, and sterile technique is the set of practices that makes equipment and areas free from all microorganisms and maintains that sterility (Principles of Sterile Technique).

Principle What it means on the exam
All objects used in a sterile field must be sterile Check intactness, dryness, and expiry date before use; torn, previously opened, wet, or floor-dropped packaging is non-sterile
Sterile touches only sterile A sterile object becomes non-sterile when touched by a non-sterile object; non-sterile items never cross over the field, and a non-sterile person does not reach over it
Anything below waist level is non-sterile Keep sterile equipment and gloved hands above waist level; table drapes are sterile only at table level
A punctured, torn, or wet barrier is contaminated Any puncture, moisture, or tear through a sterile barrier is contamination; keep the surface dry and replace it if wet or torn
If there is any doubt, it is non-sterile Whenever sterility is questionable, consider the object non-sterile

Source for the principles above: (Principles of Sterile Technique).

Two of these do most of the exam's work. The doubt rule decides every gray-area question: if you are unsure whether something stayed sterile, the credited answer treats it as contaminated. The contact rule decides every movement question: the moment a sterile surface meets a non-sterile one, the sterile surface loses (Principles of Sterile Technique). Movement itself must not contaminate the field: keep operating room traffic to a minimum and keep doors closed (Principles of Sterile Technique).

What parts of the gown and field are actually sterile?

Boundary questions are the most predictable sterile-technique questions on the exam, because the boundaries are exact. Sterile gowns and gloves are worn to prevent microbes on the skin and scrub attire of the sterile team member from migrating to the sterile field (AST Standards of Practice for Gowning and Gloving).

Area Sterile? Why
Front of gown, mid-chest to waist or field level Yes The defined sterile zone of the gown front
Sleeves, two inches above the elbow to the cuff seam Yes The defined sterile zone of the sleeve
Back of the gown No It cannot be observed by the person wearing it
Top surface of a draped table, at table level Yes Only the top surface counts; hanging edges below table level do not
Outer one inch of a sterile drape No The one-inch border at the drape's edge is considered non-sterile

Sources for the boundaries above: (AST Standards of Practice for Gowning and Gloving; Principles of Sterile Technique).

Sterility follows what a scrubbed person can see and control: the back of the gown fails because it cannot be observed, and an unattended field fails for the same reason, because a sterile field must be kept in sight to be considered sterile (AST Standards of Practice for Gowning and Gloving; Principles of Sterile Technique). Two more gown rules: the first scrub person's gown should be opened on a flat surface separate from the sterile back table, such as the Mayo stand or prep table (AST Standards of Practice for Gowning and Gloving), and a hole, puncture, or tear in the gown is a compromise of the microbial barrier and results in contamination (AST Standards of Practice for Gowning and Gloving).

How do scrubbing, gowning, and gloving work in order?

The sequence is the test. Before donning a surgical gown and gloves, you always perform surgical hand antisepsis first (AORN Guideline for Sterile Technique). The outline lists the order the same way: perform the surgical scrub, then don gown and gloves, then set up and open sterile instruments and supplies (NBSTSA 2025 CST Candidate Handbook).

There are two scrub methods. In the timed method, each surface of the fingers, hands, and arms is scrubbed for a set length of time; in the counted stroke method, each surface receives a prescribed number of brush strokes (How To Perform Surgical Hand Scrubs). A timed scrub lasts from three to five minutes depending on facility protocol, so do not treat any single minute count as universal when a question names a facility's own protocol (How To Perform Surgical Hand Scrubs).

What does not vary is direction. You scrub keeping the hand higher than the arm at all times, so bacteria-laden soap and water cannot run back onto the hand, and you proceed holding your hands above your elbows (How To Perform Surgical Hand Scrubs). After donning, gloves are inspected for integrity immediately and throughout use, and contaminated gloves must be changed using sterile technique (AORN Guideline for Sterile Technique).

Open gloving vs closed gloving

This pairing appears on the exam because the two methods look similar and are used in different moments (Gowning and Gloving Technique, University of Illinois Chicago):

Closed gloving Open gloving
Where are the hands? Hands remain inside the gown sleeves and do not touch the cuffs Hands slide all the way through the sleeves, out beyond the cuffs
When is it used? When initially donning a sterile gown and gloves When a glove must be changed during a procedure
Can it reglove? No: once a hand has passed through the cuffs, the cuffs are contaminated Yes: used to change one glove without assistance mid-procedure

Source: (Gowning and Gloving Technique, University of Illinois Chicago).

The trap is the middle row in reverse: regloving mid-case with the closed technique is an error, because the hand passing through the cuff contaminates the cuff edge, and the outside of the new glove with it (Gowning and Gloving Technique, University of Illinois Chicago).

How do you open supplies and move around the field without breaking it?

Timing is part of technique. The sterile field should be set up as close as possible to the time of use, sterile items should be introduced as close as possible to the time of use, and only one sterile field should be open per patient (AORN Guideline for Sterile Technique). Sterile objects can become non-sterile through prolonged airborne exposure, so a field opened hours early is at risk (Principles of Sterile Technique).

Before anything is opened, it is checked: inspect sterile packaging for integrity before opening it (AORN Guideline for Sterile Technique), and check packages for sterile integrity and expiration, an outline task of its own (NBSTSA 2025 CST Candidate Handbook). Movement is the other half: limiting movement and keeping doors closed reduces airborne contamination, and the number of people in the room should be kept to a minimum (AORN Guideline for Sterile Technique).

What counts as a break, and what do you do next?

The outline makes handling breaks part of the intraoperative task itself (NBSTSA 2025 CST Candidate Handbook), and the standard response is fixed: if contamination is suspected, corrective action must be taken immediately (AORN Guideline for Sterile Technique).

Break Correct response
Gloved hand touches a non-sterile surface Change the glove using sterile technique; contaminated gloves must be changed
Drape or field becomes wet, torn, or punctured Treat the barrier as contaminated and replace it
Gown has a hole, puncture, or tear A compromise in the integrity of the microbial barrier results in contamination
Package is found torn, wet, expired, or dropped Do not use it; it is considered non-sterile
Nobody is sure whether contact happened Treat the item as non-sterile and replace it
A major break in technique occurs Correct it immediately, and evaluate whether a change in surgical wound classification is necessary

Sources for the responses above: (AORN Guideline for Sterile Technique; Principles of Sterile Technique; AST Standards of Practice for Gowning and Gloving).

What the exam is really grading here is willingness. The wrong answers protect the schedule: keep going, fix it at the next pause, mention it after the case. The right answer stops, names the break out loud, and corrects it now, because corrective action for suspected contamination is immediate (AORN Guideline for Sterile Technique). That habit is surgical conscience, and these questions are where the exam measures it.

What are the sterile technique traps the exam sets?

The almost-sterile answer. "Mostly sterile" or "sterile because no one saw contact" fails the doubt rule: if there is any doubt, the object is considered non-sterile (Principles of Sterile Technique). Sterility on this exam is binary.

The wet field. Any moisture passing through a sterile barrier must be considered contaminated (Principles of Sterile Technique). "Dry the drape and continue" is never the credited answer.

When two choices both sound careful, choose the one that follows the principle exactly and corrects the problem immediately.

What this article can't do for you

This article can give you the principles, the boundaries, and the sequences. It cannot show you how you decide under time pressure: whether you spot the break hidden in the third sentence of a scenario, or confuse open and closed gloving when the question reverses them (NBSTSA 2025 CST Candidate Handbook). Reading the rules is not the same as applying them at about 82 seconds per question, which is what 240 minutes across 175 questions allows (NBSTSA 2025 CST Candidate Handbook).

That measurement is what a diagnostic is for. Upward Prep's free 10-question CST practice test gives you instant feedback, cited explanations for every answer, and a breakdown by domain, so you can see whether sterile technique is a strength you can bank or a gap to close before test day. Try the free CST practice test →

Frequently asked questions

sterile technique

Sterile technique is the set of practices used to establish and maintain a sterile field, foundational in perioperative practice because it safeguards patients against surgical site infections (AORN Guideline for Sterile Technique). On the CST exam it is tested in Preoperative Preparation and as the first task of Intraoperative Procedures (NBSTSA 2025 CST Candidate Handbook).

what is a break in sterile technique

A break is any event that violates the principles of asepsis: a sterile surface touching a non-sterile one, a punctured, torn, or wet barrier, hands dropping below waist level, or a field left out of sight (Principles of Sterile Technique). If contamination is suspected, corrective action must be taken immediately (AORN Guideline for Sterile Technique).

open gloving vs closed gloving

In closed gloving, the hands remain inside the gown sleeves and do not touch the cuffs; the method is used when initially donning a sterile gown and gloves. In open gloving, the hands slide through the sleeves out beyond the cuffs; the method is used when a glove must be changed during a procedure. Closed gloving cannot be used to reglove, because once a hand has passed through the cuffs, the cuffs are contaminated (Gowning and Gloving Technique, University of Illinois Chicago).

what part of the gown is sterile

The front of the gown from mid-chest level to the level of the sterile field or waist level, and the sleeves from two inches above the elbow to the cuff seam. The back is not sterile because it cannot be observed by the wearer, and the axillary region is not a sterile area (AST Standards of Practice for Gowning and Gloving).

how long is the surgical scrub

It depends on the method and the facility's protocol. A timed scrub lasts from three to five minutes depending on facility protocol, while the counted stroke method gives each surface of the fingers, hands, and arms a prescribed number of brush strokes. In both methods the hands are kept higher than the elbows so water runs from the hands toward the elbows (How To Perform Surgical Hand Scrubs).