What Score Do You Need to Pass the NHIE?

The NHIE passing score is a scaled score of 500 on a 200 to 800 scale — not a percentage and not a fixed number of correct answers. EBPHI converts your raw score to that scale to adjust for difficulty differences between exam versions, so 500 means the same standard on every form.

Try 3 real NHIE questions

Real questions from the NHIE bank, with the cited explanation for every answer. Tap an answer to check it.

1. A downspout has separated from the gutter elbow and is discharging directly onto the soil at the foundation. What is the proper recommendation?

2. A steep slope behind the house shows active erosion gullies approaching the foundation. What should you recommend?

3. An inspector examining a newly installed shingle roof wants to verify correct nail installation. Properly driven roofing nails should be:

Why isn't 500 a percentage?

This is the most common misunderstanding about NHIE scoring, and it starts with simple-looking math: 500 out of 800 looks like 62.5%. It is not 62.5% of the questions, and it is not a grade.

The National Home Inspector Examination is scored by a scaled scoring system, the same kind of system used by exams like the ACT and SAT. Your raw score — the number of questions you answered correctly — is converted to a score between 200 and 800, with a passing scaled score of 500 (EBPHI Exam Overview Packet).

The scale runs from 200 to 800, not from 0, which is one reason the percentage reading fails: the distance from 200 to 500 is not a share of questions answered correctly (EBPHI Exam Overview Packet). The number 500 is a point on a standard scale. It marks a level of competence, not a count.

The practical consequence: you cannot work backwards from 500 to a number of questions with a calculator at home. Anyone who tries is doing arithmetic on the wrong thing.

How does EBPHI set the passing point?

Because there are multiple versions of the NHIE, scaled scoring is how EBPHI keeps the bar fair. In EBPHI's own words, a scaled scoring system is a fair way to evaluate, score, and adjust for differences in difficulty between the questions that appear on different versions of the exam (EBPHI Exam Overview Packet).

The passing point itself is set by a criterion-referenced technique. Based on the difficulty rating for each item, a panel of experts sets the passing score under the guidance of a psychometrician, and the psychometrician consultant performs a statistical analysis following each administration of the exam (EBPHI Exam Overview Packet).

Criterion-referenced matters for how you should think about the test. You are measured against a fixed standard of competence, not ranked against the other people testing that day. A strong group of candidates does not push your bar up, and a weak group does not pull it down. The standard is the standard, and 500 is where it sits on every form.

How many questions do you need to get right?

There is no official answer, and that is the honest answer. EBPHI publishes the scaled passing score, 500, and describes the conversion from raw score to scaled score. It does not publish the raw number of correct answers that produces a 500 on any given form (EBPHI Exam Overview Packet).

Expect to meet confident numbers anyway. Search results and forum posts attach various percentages to 500, sometimes by dividing 500 by 800, sometimes by repeating what another candidate was once told. None of those figures comes from EBPHI. Because the conversion adjusts for the difficulty of your form's questions, the raw count behind a 500 can differ between versions of the exam: a form with harder questions and a form with easier questions do not need the same raw count to represent the same competence. That is the whole point of the adjustment described in the packet (EBPHI Exam Overview Packet).

Keep the denominator straight while you think about this. Only 175 of the 200 questions are scored. The other 25 are unscored pretest questions, mixed in with no label, so you cannot identify them or skip them safely (EBPHI Exam Overview Packet). The only workable approach is to answer every question as if it counts, because 175 of them do.

So treat any exact "you can miss this many" claim as a guess, and use percentages the way they are actually useful: as a way to judge your practice performance and your margin, not as a prediction of the scaled score EBPHI will report.

Does the score work the same in every domain?

Your result is one overall scaled score, and 500 is the overall bar. But the exam behind that score is not weighted evenly, and the weighting decides where a weak area hurts you most. The current blueprint, from the 2023 role delineation study in the packet updated June 4, 2024, is:

Domain Share of exam Approx. scored questions (of 175)
Property and Building Inspection / Site Review 70% About 122 to 123
Analysis of Findings and Reporting 20% About 35
Professional Responsibilities 10% About 17 to 18
Total scored 100% 175

The domain weights are from the EBPHI content outline in the Exam Overview Packet (EBPHI Exam Overview Packet). The scored-question counts are derived arithmetic from the 175 scored questions (EBPHI Exam Overview Packet).

Read the table the way a retaker would. A weak Domain 1 costs you ground across about 122 to 123 questions, and no amount of strength in the 10% domain can make that up, because there are only about 17 to 18 questions there to earn. Two candidates can finish with the same practice accuracy and very different risk, depending on whether their misses sit in the 70% domain or the 10% one. Your overall score is single, but your preparation should not be flat.

One more warning belongs here: older study materials still teach a 63/25/12 split. That was the pre-2023 outline. The current weights are 70/20/10 (EBPHI Exam Overview Packet). Studying to the old split misallocates your time before you answer a single question.

What practice score should you aim for?

Aim above the passing line, not at it. You cannot aim at 500 directly, because no practice test can reproduce EBPHI's conversion. What you can control is margin: steady accuracy, across all three domains at their real weights, under the real time limit of 4 hours for 200 questions (EBPHI Exam Overview Packet).

The context argues for margin. The first-time pass rate in 2024 was 49% (AHIT press release, Sept 2, 2026). About half of first-time candidates did not reach 500. Most of them did not walk in cold. They walked in close to the line, and exam day — nerves, an unfamiliar room, a form that felt harder than their practice sets — took the rest.

Use practice percentages as a readiness signal with three conditions attached. First, the practice has to follow the 70/20/10 weights, or the percentage is measuring the wrong exam. Second, it has to be timed: 200 questions in 4 hours works out to 72 seconds per question, and accuracy that only holds at a relaxed pace will not hold there. Third, look at accuracy by domain, not just the total. A strong total built on the small domains can hide a Domain 1 problem, and Domain 1 is 70% of your score.

When your timed, weighted practice is consistently strong — not once, but across repeated runs, with no domain lagging far behind the others — you have the margin that 500 actually requires. Until then, the score to chase is not a number. It is the gap between your weakest domain and the rest.

When do you get your score, and what do you do with the report?

At PSI test centers, you receive an original copy of your score report before you leave. If you test through a different administrator, EBPHI directs you to contact that administrator for score report information (EBPHI Exam Overview Packet).

If you took the exam to qualify for licensing or other regulation in your state, contact the regulating agency to determine how to submit your passing score report. EBPHI links to the various regulatory bodies from its site (EBPHI Exam Overview Packet). Passing the exam and finishing your state's licensing steps are two separate things, and the report is the hand-off between them.

Keep the report either way. If you passed, it is your proof for the regulator. If you did not, it is the starting point for a focused retake plan: pair it with your own practice records by domain, and you know whether the points leaked in the big systems domain, in reporting, or in professional responsibilities.

What happens if you score below 500?

A score below 500 is a delay with a price tag, not a dead end. You may retake the NHIE as many times as you wish, unless your state regulates retakes otherwise, but you must wait 30 days between attempts, and each examination requires a separate fee. The exam costs $225 per test in most states, and examination fees are nonrefundable and nontransferable (EBPHI Exam Overview Packet).

That math is why the wait should be spent narrowly. Thirty days is enough time to rebuild one or two weak areas. It is not enough time to restudy an entire house. Weight the retake plan the way the exam is weighted: Domain 1 first at 70%, then reporting at 20%, then professional responsibilities at 10% (EBPHI Exam Overview Packet). Inside Domain 1, start with the system where your practice accuracy is lowest, because that is where the most scored questions are waiting.

The candidates who repeat the same result usually repeat the same preparation: everything reviewed evenly, nothing fixed deeply. A below-500 score tells you the standard did not move. Your preparation has to.

The bottom line

The NHIE passing score is a scaled 500 on a 200 to 800 scale. It is not 62.5%, it is not any fixed number of correct answers, and EBPHI does not publish a raw equivalent, because the conversion adjusts for difficulty differences between exam versions (EBPHI Exam Overview Packet). The useful response to that uncertainty is margin: timed practice at the real 70/20/10 weights, with no domain left weak.

Reading about the 500 standard cannot tell you where you stand against it. It cannot show you whether your electrical or structural accuracy holds up at 72 seconds per question, or whether reporting questions are quietly pulling your overall result down. A short diagnostic can. Upward Prep's free 25-question NHIE practice test gives you instant feedback, cited explanations for every answer, and a breakdown across the exam's domains — no account needed. Try the free NHIE practice test →

Frequently asked questions

What score do you need to pass the NHIE?

A scaled score of 500 on a 200 to 800 scale (EBPHI Exam Overview Packet). The score is scaled, so 500 represents the same level of competence on every version of the exam.

Is 500 on the NHIE a percentage?

No. 500 is a point on a 200 to 800 scaled score range, not a percentage of questions answered correctly. Dividing 500 by 800 gives 62.5%, but that arithmetic does not describe the exam: the scale starts at 200, and EBPHI converts your raw score to the scale to adjust for difficulty differences between versions (EBPHI Exam Overview Packet).

How many questions do you need to get right to pass the NHIE?

EBPHI does not publish an exact number. Your raw score — the number of questions you answered correctly out of the 175 scored questions — is converted to the 200 to 800 scale, and the conversion adjusts for your form's difficulty, so the raw count behind a 500 can vary between versions (EBPHI Exam Overview Packet). Any site stating an exact number or percentage is giving you an estimate at best, not an EBPHI figure.

What is a scaled score?

A scaled score converts your raw result — how many scored questions you answered correctly — onto a standard range, here 200 to 800. EBPHI uses scaled scoring because there are multiple versions of the NHIE, and the conversion adjusts for differences in difficulty between the questions on different versions, so scores mean the same thing across forms (EBPHI Exam Overview Packet).

When do you get your NHIE score?

At PSI test centers, you receive an original copy of your score report before you depart. Candidates who test through a different administrator should contact that administrator for score report information (EBPHI Exam Overview Packet).

What happens if you score below 500 on the NHIE?

You can retake the exam after a 30-day wait, and each attempt requires a separate fee — $225 per test in most states, nonrefundable. You may retake as many times as you wish unless your state regulates retakes otherwise (EBPHI Exam Overview Packet). Spend the wait on the domains and systems where your practice accuracy is weakest, weighted to the 70/20/10 blueprint.